User manual

18
of the water in the tub.
Child safety lock enabled
This device permits you to leave the appliance
unsupervised without having the worry that
children might be injured by or cause damage
to the appliance.This function remains
activated also when the washing machine is
not working.There are two different ways to set
this option:
● before pressing the Start/Pause: it will be
impossible to start the machine.
● after pressing the Start/Pause: it will be
impossible to change any other programme
or option.
To enable or disable this option press
simultaneously for about 6 seconds “Easy Iron”
and “Extra Rinse” buttons until the icon
appears or disappears from the display.10.
Select the Start/Pause
To start the selected programme, press the
Start/Pause button; the corresponding green
pilot light stops flashing. The «Lock» light
illuminates to indicate that the appliance starts
operating and the door is locked.The “Lock”
light indicates if the door can be opened:
● light on: the door cannot be opened. The
appliance is running.
● light off: the door can be opened.
The washing programme is finished.
● light flashing: the is opening.
To interrupt a programme which is running,
depress the Start/Pause button: the
corresponding green pilot light starts to flash.
To restart the programme from the point at
which it was interrupted, press the Start/Pause
button again.If you have chosen a delayed
start, the machine will begin the countdown.
IMPORTANT!
If an incorrect option is selected, the red pilot
light of the Start/ Pause button flashes for 3
times and the message Err is displayed for
about 2 seconds.
11. Select the Delay Start
Before you start the programme, if you wish to
delay the start, press repeatedly the «Delay
Start» buttons and , to select the
desired delay. The selected delay time value
(up to 20 hours) will appear on the display for
about 3 seconds, then the duration of the
programme will appear again.You must select
this option after you have set the programme
and before you press the Start/Pause button.
The wash programme can be delayed from 30
mins - 60 mins - 90 mins, 2 hours and then by
1 hour up to a maximum of 20 hours by means
of this button.
Selecting the delayed start:
● Select the programme and the required
options.
● Select the delay start.
● Depress “Start/Pause” button: the machine
starts its hourly countdown.
The programme will start after the selected
delay has expired.
Cancelling the delayed start:
You can cancel the delay time at any moment,
before you press the Start/Pause button. If you
have already pressed the Start/Pause button,
and you wish to cancel the delay time, proceed
as follows:
• set the washing machine to PAUSE by
pressing the Start/Pause button;
• press the Delay Start buttons once until the
symbol 0’ is displayed.
• press the Start/Pause button again to start
the programme.
Operating sequence
Smart 132973880.qxd 02/07/2008 11.41 Pagina 18