WASHING MACHINE ZWF 1432 W ZWF 1432 S ZWF 1632 W ZWF 1432 W On/Off Cottons Synthetics Delicates Wool 95°C 60°C 50°C 40°C 30°C 1200 900 700 500 Rinse Hold Prewash Prewash 40° AA Half Load AQUAC YCLE 6 kg Start/ Pause Skip Wash Rinse Rinse Hold Spin Drain Filter End Reset Fabrics Temp. Spin Option Quick Installation Guide: visit our WEB SITE to view an install video www.video.uk.electrolux.
Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety.
Contents For the User Important Safety Information Your New Washing Machine Description of the Appliance 2 5 5 5 The Control Panel 6-8 6 Turning the acoustic signal off Operating Sequence Load the laundry Measure out the detergent Measure out the fabric softener Switch the machine on Select the required programme/fabric Select the temperature Select the spin speed or the Rinse Hold option Select the desired options Start the programme How to change an option or a programme during its cycle How to cance
Your New Washing Machine Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric. ● ● ● ● ● ● The possibility of selecting the temperature and all the options offered by this washing machine gives you truly “customised” washing.
Description of the Appliance 1 2 3 4 5 1 Detergent dispenser drawer Control panel Door opening handle Drain pump Adjustable feet 2 ZWF 1432 W On/Off Cottons Synthetics Delicates Wool 95°C 60°C 50°C 40°C 30°C 1200 900 700 500 Rinse Hold Prewash Prewash 40° AA Half Load AQUAC YCLE 6 kg Start/ Pause Skip Wash Rinse Rinse Hold Spin Drain Filter End Reset Fabrics Temp.
The Control Panel ZWF 1432 W ZWF 1432 W On/Off 1 Cottons Synthetics Delicates Wool 2 95°C 60°C 50°C 40°C 30°C Prewash Prewash 1400 900 700 500 Rinse Hold 40° AA Half Load Fabrics Temp. Spin Option 3 4 5 6 Start/ Pause Skip Reset 7 1 “On/Off” button Wash Rinse Rinse Hold Spin Drain Filter End 8 9 IMPORTANT! By pressing the “Temp.
“Start/Pause” button To complete the cycle, press “Skip Reset” button once, all the leds are off, then choose one of the following options: • Drain only: press FABRIC button in order to select the desired programme and press the “Skip Reset” button until the only led “Drain” illuminates.
To select Drain only, press the “Skip” button three times, the Wash - Rinse - Spin LED,s go out. The Drain LED only remains alight. The “Skip” button is then used to cancel or advance the programme to the required phase. The “Skip” button can only operate during the selection of the programmes or when the programme is in pause. A normal wash cycle consists of the following phases, Wash - Rinse - Spin and is confirmed by the illumination of the corresponding LED,s.
Operating Sequence Before the first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start the machine. Close the drawer gently. 4.
7. Select the spin speed or the Rinse Hold option 9. Start the programme Press the “Start/Pause” button. The relevant light will stop flashing and only the light relevant to the phase that is in progress will remain lit. Press the “Spin” button repeatedly, in order to select the desired spin speed or the “Rinse Hold” option. The relevant light will light up. If you select the Rinse Hold option, the machine will stop at the end of the programme with the water still in the tub.
12. How to open the door during the cycle of a programme • Drain and Spin: press FABRIC button in order to select the the previously selected programme (the type of fabric just washed) and press the “Skip Reset” button until the only led “Spin” illuminates. You can change the spin speed by means of “Spin” button if needed, then depress “Start/Pause” button.
Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
Which detergent?.... And in which form? To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines. To maintain the appearance of your clothes and household textiles and to make them last longer you should use different types of detergent for different washes, whether for whites, colours or delicates.
Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. WASHING SYMBOL WASH ACTION 95 Normal (Maximum) White Cotton or Linen without Special Finishes 60 Normal (Maximum) Cotton, Linen or Viscose without Special Finishes Colourfast at 60°C.
Washing programmes Type of laundry and symbols on labels 60 Load 40 2.3 53 6 kg Main wash at Cottons Spin / Rinse Hold 60° - 50°- 40° - 60° - 50° - 40° Prewash 30°C 30°C 40° AA** 3 rinses Half Load Long spin 1.3 60 6 kg Cottons*** Main wash at 60°C + 40° AA 60°C 3 rinses Long spin Spin / Rinse Hold 1.14 54 Main wash at Synthetics 60° - 50° - 40° - 60° - 50° - 40°30°C 30°C 3 rinses Short spin Spin / Rinse Hold Prewash 40° AA** 0.
Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the top part of the additive compartment should be removed. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
P1115 P1090 • Remove any objects from the pump impeller by rotating it. The dangers of freezing If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose. ● Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out. ● Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again.
Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptom Possible causes The machine vibrates when spinning ● ● ● ● ● The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not level and stable (check diagonally). The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum. Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum.
Customer Care Customer Care Department - Zanussi/Electrolux Major Appliances Addington Way, Luton Bedfordshire LU4 9QQ Tel 08705 727 727* For general enquiries concerning your Zanussi Electrolux appliance or for further information on Zanussi Electrolux products, please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.zanussi.co.uk: * calls to this number may be recorded for training purposes.
Installation Instructions It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Unpacking ● The transport safeguard must be removed before putting the appliance into operation. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Important ! You are advised to keep all the packaging for re-use in case the machine is to be transported again. ● After removing all the packaging, with assistance carefully lay machine on it’s back to remove the polystyrene base from the bottom.
Water inlet Water drainage An inlet hose is supplied and can been found inside the machine drum. Do not use the hose from your previous machine to connect to the water supply. 1. Open the porthole and extract the inlet hose . 2. Connect the hose with the angled connection to the machine. Important! Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap.
Levelling If your drain hose looks like this (see below) you do not require the “U” piece”. Just push the hose firmly into the standpipe. Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable (check diagonally). If necessary, check the setting with a spirit level. P1212 2. Onto a sink outlet spigot.
If you require any further advice please contact your local water authority. Should the plug need to be replaced for any reason, proceed as described below.
From the Electrolux Group. The world’s No. 1 choice. The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.