User manual

CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant standards. Different cau-
ses can change the data: the quantity and type of laundry and ambient temperature. Wa-
ter pressure, the supply voltage and the temperature of inlet water may also affect the
washing programme duration.
Programmes Load (kg)
Energy con-
sumption
(kWh)
Water con-
sumption (li-
tre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture (%)
1)
Cottons Flex 60°C 8 1.85 80 220 53
Cottons Flex 40°C 8 1.2 80 200 53
Cottons 60°C 8 1.00 52 240 53
Synthetics 40°C 3.5 0.8 60 150 35
Delicates 40°C 3.5 0.5 60 110 35
Wool/Handwash
30°C
2)
2 0.25 55 75 30
1) At the end of spin phase.
2) Not available for some models.
OPTIONS
TEMP
Set this option to change the default temperature.
Indicator = cold water.
The display shows the set temperature.
SPIN
With this option you can decrease the default spin
speed.
The display shows the indicator of the set speed.
Additional spin options:
No Spin
• Set this option to remove all spin phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for some
washing programmes.
• The display shows the indicator .
Rinse Hold
• Set this option to prevent the laundry creases.
• The washing programme stops with the water in
the drum. The drum turns regularly to prevent
the laundry creases.
• The door stays locked. You must drain the water
to unlock the door.
• The display shows the indicator .
To drain the water refer to ‘At the end
of the programme’.
Night Cycle
• Set this option to remove all spin phases and to
perform a silent washing.
• The rinse phase uses more water for some
washing programmes.
• The related indicator comes on.
• The washing programme stops with the water in
the drum. The drum turns regularly to prevent
the laundry creases.
• The door stays locked. You must drain the water
to unlock the door.
• The display shows the indicator .
9