ZANUSSI User Manual Washing Machine ZWG1100M ZWG1120M ZWG1140M
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7-8 Helpful hints and tips _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ 9 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _11 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _13 What to do
ZANUSSI • All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual. • After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall. • If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.
Product description The detergent compartment The control panel Quick Guide 1. Install the washing machine 2. Load the laundry Door handle Basket 3. measure out the detergent 4. Close the machine door 5. Put down (hang up) the drain pipe 6. Turn on the water tap 7. Plug the power supply 8. Select the desired programme Service panel Filter door 9.
ZANUSSI Control panel 1 9 8 7 2 6 3 4 5 1 Display 6 DELAY START button 2 OPTIONS button 7 SPIN button 3 Programme selector dial 8 TEMPERATURE button 4 START/PAUSE button 9 SOIL LEVEL button 5 ADDITIONAL CHILD LOCK button Display • The corresponding lights (pre wash, washing, rinse, spin) will flash when the washing proceeds to each step during the washing process. • The «DELAY» will light when the delay programme is selected and it will display the delay time.
Additional child lock. • There is an additional, selectable child safety feature. To select it, press button 5 for three seconds. The Child Lock button also locks the Start/Pause button. An English text and the image of the head of a child appear in the display when the lock is activated. You can now also press the Pause button without anything happening. There will just be an error beep.
1000 1200 600 95 (Default) 95 Intensive + Self Clean Main Wash Only X 6 Non-optional Optional X X X X X X X X X X II Main wash X X X 0:01 0:08 0:14 0:32 1:03 The clothes that only need the single wash No detergent Comparatively dirty clothes Comparatively dirty children's wear 1:20 1:52 Ordinary children's wear Children's underwear Silk clothes Chemical fibre clothes 0:53 1:34 0:34 0:57 Woolen clothes 2:47 0:43 Lightly Soiled Comparatively thick clothes Ordinary clot
600 30 Delicates X Drain 6 Non-optional Optional X X X X X X X X X X II Main wash X X X 0:01 0:09 0:15 0:32 1:03 The clothes that only need the single wash No detergent Comparatively dirty clothes Comparatively dirty children's wear 1:21 1:53 Ordinary children's wear Children's underwear Silk clothes Chemical fibre clothes 0:54 1:35 0:34 0:58 Woolen clothes 3:05 0:43 Lightly Soiled Comparatively thick clothes Ordinary clothes 0:24 1:24 Clothes to be Default washed (su
ZANUSSI Helpful hints and tips Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Before loading the laundry Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time.
Degrees of water hardness Water hardness is classified in so-called «degrees» of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. If the water hardness degree is medium or high we suggest you use a water softener, following the manufactures instructions. When the degree of hardness is soft, re-adjust the quantity of the detergent.
ZANUSSI Daily Use Load the laundry Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. Measure out the detergent and the fabric softener Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment or in the appropriate compartment if the selected programme/option it requires (see more details in «Detergent dispenser drawer»).
Cancelling the Delay Start after having started the programme: 1. Set the washing machine to PAUSE by pressing button 4. 2. Press button 6repeatedly until the display shows 0'. 3. Press button 4 again to start the programme. Important! • The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing button 4 and wait a few minutes before opening the door. After you have closed the door, press the same button again.
ZANUSSI Care and cleaning Warning! You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
If you wash rugs, it is compulsory to inspect and clean the filter. Cleaning the water inlet filters Important! If the appliance doesn't fill, takes long to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter «What to do if...» for more details), check if the water inlet filters are blocked. To clean the water inlet filters: • Turn off the water tap. • Unscrew the hose from the tap. • Clean the filter in the hose with a stiff brush.
ZANUSSI What to do if..... Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Malfunction The washing machine does not work Before contacting your local Service Centre, please carry out the checks listed below. Possible Cause / Solution Close the washing machine's door. Press the ▽S tart/Pause▼key. Water leakage Correctly connect the inlet water pipe.
Possible Cause / Solution Malfunction Foam spills from the detergent drawer The machine stops when the procedure has not been finished The drainage pump is noisy during operation after the water has been drained. The machine stops for some time during the wash procedure. Check if the amount of detergent is excessive, if it is the specialized detergent for the drum washing machine. Dip one scoop of the softener mixed with 1/2 liter of water to the detergent box II.
ZANUSSI If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine. The Service Centre will require this information. Technical data 948mm Rated Mains Wash power Spin power Heat power 495mm 855mm Max. Power Water pressure Net weight Drain method Spin method Washing capacity Maxinum spin speed rpm 595mm Waterproof Level Drain Method Drain Hose 220-240 V/ 50Hz 150W 360W 2000W 2150W 0.
Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. Unscrew the four bolts using a spanner. Slide out the relevant plastic spacers. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
ZANUSSI Caution! The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. Water drainage The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. In a sink drain pipe branch.
ZANUSSI www.electrolux.com www.zanussi.
