User manual

residue from the drum and tub. Pour 1/2
a measure of detergent into the main
wash compartment and start the ma-
chine.
Daily use
Load the laundry
Open the door by
carefully pulling the
door handle out-
wards. Place the
laundry in the drum,
one item at a time,
shaking them out as
much as possible.
Close the door.
Make sure that no
laundry stays be-
tween the seal and
the door. There is a
risk of water leakage
or damage to the
laundry.
Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the main wash compart-
ment
or in the appropriate compartment if
the selected programme/option it requires
(see more details in "Detergent dispenser
drawer").
If required, pour fabric softener into the com-
partment marked
(the amount used must
not exceed the «MAX» mark in the drawer).
Close the drawer gently.
Select the required programme by turning
the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine will
propose a temperature and automatically select
the maximum spin value provided for the pro-
gramme you have chosen. You can change
these values by operating the corresponding
buttons. The green pilot light of the button 8
starts to flash.
The selector dial can be turned either clockwise
or counterclockwise. Turn to position
to re-
set programme/Switching the machine off.
At the end of the programme the selector
dial must be turned to position
, to
switch the machine off.
Caution! If you turn the programme
selector dial to another programme when
the machine is working, the red pilot light of
button 8 will blink 3 times and the message Err
is displayed to indicate a wrong selection. The
machine will not perform the new selected
programme.
Select the temperature by pressing
button 2
By selecting a programme, the appliance pro-
poses automatically a default temperature.
Press this button repeatedly to increase or de-
crease the temperature, if you want your laun-
dry to be washed at a different temperature.
Reduce the spin speed by pressing button
3
By selecting a programme, the appliance pro-
poses automatically the maximum spin speed
provided for that programme.
Press button 3 repeatedly to change the spin
speed, if you want your laundry to be spun at a
different speed.
15
www.zanussi.com