User manual

If you are unable to identify or solve the prob-
lem, contact our service centre. Before tele-
phoning, make a note of the model, serial num-
ber and purchase date of your machine: the
Service Centre will require this information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
Mod
.
.
.
. ...
.
.
.
Prod. N
o.
.
.
. ...
.
.
S
e
r
.
No
.
... ...
.
..
Technical data
Dimensions Width
Height
Depth
Depth (Overall dimensions)
60 cm
85 cm
55.3 cm
64.2 cm
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate, on
the inner edge of the appliance door.
Water supply pressure Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load Cotton 7 kg
Spin Speed Maximum 1000 rpm
Installation
Unpacking
Caution! All transit bolts and packing
must be removed before using the
appliance.
You are advised to keep all transit devices
so that they can be refitted if the machine
ever has to be transported again.
After removing all the
packaging, carefully
lay machine on it's
back.
2
1
Remove the polystyr-
ene base from the
bottom.
Remove the power supply cable and the ho-
ses from the hose holders on the rear of the
appliance.
23
www.zanussi.com