User manual

FAILURE
CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
Shut down your
machine and
unplug. Turn off
your tap and apply
to the nearest
authorized service.
The heater of your
machine or the
heat sensor has
failed.
The start/pause
light and program
end light blink.
Err 05
Shut down your
machine and
unplug. Turn off
the tap and apply
to the nearest
authorized service.
The program
ready light and
program end light
blink.
The motor has
failed.
Err 06
The program
start/pause light,
ready light and
program end light
stays on
permanently.
Shut down your
machine and
unplug. Turn off
the tap and apply
to the nearest
authorized service.
Configuration
error.
Err 07
Shut down your
machine and
unplug. Turn off
the tap and apply
to the nearest
authorized service.
The start/pause
light,program
ready light and
program end light
blink.
The motor has
failed.
Err 08
If the network
voltage is lower
than 150V or
higher than 260V,
your machine will
automatically stop.
When the network
voltage is
recovered, your
machine will
continue its
operation.
The program
ready light and
program end light
stays on
permanently.
The network
voltage is too high
or too low.
Err 09
27