User manual
Table Of Contents
- Contents
- Safety information
- Safety Instructions
- Product description
- Control panel
- Programme Chart
- Consumption values
- Options
- Settings
- Before first use
- Daily use
- Loading the laundry
- Using detergent and additives
- Detergent compartments
- Liquid or powder detergent
- Setting a programme
- Starting a programme without the delay start
- Starting a programme with the delay start option
- Cancelling a programme
- Interrupting a programme and changing the options
- Opening the door
- At the end of the programme
- Stand by
- Hints and tips
- Care and cleaning
- Troubleshooting
- Technical Data

CAUTION!
Make sure
that no
laundry
stays
between the
seal and the
door. There
is a risk of
water
leakage or
damage to
the laundry.
Using detergent and additives
2
1
1. Measure out the
detergent and the
fabric conditioner.
2. Carefully close the
detergent drawer.
Detergent compartments
CAUTION!
Use only specified detergents for
washing machine.
Always obey the instructions that
you find on the packaging of the
detergent products.
1 Detergent compartment for prewash
phase or soak programme (if availa-
ble). Add the detergent for prewash
and soak before the start of the pro-
gramme.
2 Detergent compartment for washing
phase. If you use a liquid detergent,
put it immediately before you start
the programme.
Compartment for liquid additives
(fabric conditioner, starch). Put the
product in the compartment before
you start the programme.
Liquid or powder detergent
Pull out the detergent
dispenser until it stops.
The position A of the
detergent divider is for
powder detergent.
A
To use liquid detergent:
1. Remove detergent
divider from the position
A.
B
2. Adjust the detergent
divider in position B.
3. Carefully close the
detergent dispenser.
To use powder detergent again,
insert the detergent divider in the
position A again.
When you use the liquid detergent:
• Do not use gelatinous or thick
liquid detergents.
• Do not put more liquid detergent
than the edge of the detergent
devider.
• Do not set the prewash option.
• Do not set the delay start.
Setting a programme
1. Turn the programme knob to switch the
appliance on and set the programme:
• The indicator of the button Старт/
Пауза flashes.
• The display shows the programme
duration.
2. If necessary, change the temperature and
the spin speed or add available options.
When you activate an option, the indicator
of the set option comes on.
10 www.zanussi.com