Isostand MKII
Thank you for choosing a piece of Zaor studio furniture, which will hopefully make your life easier, more ergonomic and improve the looks of your workspace. Before you can enjoy the comfort of your new acquisition you need to assemble it. We have tried to give you as much detail as needed and as little as possible. Should you run into any difficulty with this assembly you can get in touch with us via sales@zaorstudiofurniture.com to set up a Skype session or phone call.
2 2 1 Graph 1 Step 1 put part 2 upside down and attach the base plate #1 to the stem aligning the holes and inserts in both parts and fixate using the hex screws ph Graph 2 Step 2 Set up the stand as shown Lower down the connecting panel Attach using the hex screws see ph .
aperta 200 3 4 Graph 3 2 Step 3 Finish assembling the to part # using hex screws MATERIALS USED fixing the speaker plate from underneath ph -MDF and solid wood (ash or Oak) - iron height adjustment mechanism - Aperta made from aluminum and rubber PACKING LIST 12 hex screws 30 - 4 wood parts - 5 aluminum parts (Aperta) Step 4 put the Isoacoustics A on the top plate into the predisposed pods.
