Technical information

Fuse (inside the battery bag)

Note: For professional

reference only.

Do not replace this fuse

without professional help.

ASSEMBLING THE ZAPPY

1. Unpack the ZAPPY

carefully so that you do not misplace any of the parts.

2. Place the ZAPPY

on a flat, level surface. (You may place a cube (app. 6-8cm/ 2 ½ ? -

3? thick) under the front part of the footboard; to hold it in a balance position.)

3. Remove the bolts and nuts from the connecting tube clamp (B). Place the connecting

tube into the top opening (A) and slip back the bolt through the clamp (B).

4. Tighten the bolts and nuts using the 2 allen wrenches in the tools kit.