Installation guide

ManualsBrandsZavig ManualsHome building and DecorF7115

Zavio F7110 / F7115 Quick Installation Guide

Please follow the installation steps below to set up your F7110 / F7115 Box IP Camera.

Check the package contents against the list below. See P.1

Physical overview. See P.1

I/O Terminal Block Pin Definition. See P.2

LED Indicator Definition. See P.3

I/O Terminal Block Circuit. See P.3

Install the hardware and connect all cables. See P.4

Microsoft OS: Use the software CD to install Intelligent IP Installer. See P.5

Access the IP Camera using Intelligent IP Installer. See P.5

Mac OS using Safari Browser. See P.7

Change lighting environment setting. See P.8

Change the Web Interface into your preferred language. See P.8

Use IP Camera via Mobile Phone. See P.8

Wireless Setting (F7115 Model). See P.9

Windows Live Messenger Setting. See P.9

Access to Internet via Static IP, Dynamic IP or both. See P.11

Application of IP Camera. See P.13

For more information, please check the User Manual available in the Software CD or you can download the latest

software from http://www.zavio.com

Package Contents

Camera

F7110 / F7115 IP Camera

Quick Installation Guide

Brief product information and quick installation

Software CD

IP Surveillance Software

Intelligent IP Installer

User Manual

Language Packs

Mounting Bracket

Three screw, Lock ring, and one bracket

Accessory

BNC female to RCA male adapter

8 pin terminal block for DI/DO and RS-485

Dual antenna for connection of IEEE 802.11b/g/n wireless network

(F7115 only)

Adaptor

12V DC, max 12W

Physical overview

Analog Video Out

Dual Antenna (F7115)

Auto Iris

Summary of content (14 pages)

PAGE 1
Zavio F7110 / F7115 Quick Installation Guide Please follow the installation steps below to set up your F7110 / F7115 Box IP Camera. Check the package contents against the list below. See P.1 Physical overview. See P.1 I/O Terminal Block Pin Definition. See P.2 LED Indicator Definition. See P.3 I/O Terminal Block Circuit. See P.3 Install the hardware and connect all cables. See P.4 Microsoft OS: Use the software CD to install Intelligent IP Installer. See P.
PAGE 2
WLAN LED Indicator (F7115) SD Card LED Indicator Power LED Indicator 8 7 6 5 4 3 2 1 WPS: Push WPS button to configure wireless connection automatically. This function is only available in F7115. Reset: When the device is powered, press the Reset Button to reboot the device, or hold the Reset Button for 10 seconds to set the settings back to factory default. I/O Terminal Block Pin Definition PIN Definition Description Max. V/A 1 Ground - 2 + 12V DC 12V DC 1.
PAGE 3
LED Indicator Definition POWER LED Steady Red Boot up process Steady Green Boot up complete Steady Green → Flash Orange Push WPS button and ready for connecting wireless router / AP Flash Orange → Steady Green WPS configuration successful Flash Orange → Steady Red 30 Secs WPS configuration failed Steady Green → Unlit Push reset button and then reset Steady Green → Unlit → Steady Green Push reset button for at least 5 secs and then reset to default Steady Green → Flashing Orange Firmware upgra
PAGE 4
Install the hardware and connect all cables a.Mounting the Lens to the Camera 1. Mount the lens by turning it clockwise on the camera until it stops. 2. Unscrew the focus controller to adjust the focus. 3. Tighten the focus controller when completing. b. Wall mounting and Ceiling mounting 1. Use the 3 supplied screws to fix the base plate to a flat surface. 2. Loosen the lock ring to adjust the desired angle of the camera. 3. Tighten the lock ring. c. Connect all cables c1.
PAGE 5
Microsoft OS: Use the software CD to install Intelligent IP Installer Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow those steps to install the firmware. Select “Intelligent IP Installer” and follow the installation process to complete the installation. Access the IP Camera using Intelligent IP Installer 1. Before using Intelligent IP Installer, please check two setting. a. Browser’s Internet Properties → Security b.
PAGE 6
3. Enter your Username and Password to login to the IP Camera. (Default is admin / admin) 4. When accessing the IP Camera for the first time, a yellow information bar appears below the address bar: This website wants to install the following add-on: ‘AxvideoView.cab from ‘Zavio Inc’. 5. Click the information bar, and select Install ActiveX control. 6. Click Install.
PAGE 7
. Live video displays in the centre of your web browser. Mac OS using Safari Browser 2. Click Bonjour function and select the camera you wish to access. 1. Select Safari icon 3. Enter name and password to login to the IP 4. The monitor image will be displayed in your browser. camera.
PAGE 8
Change Lighting environment setting The default setting of lighting environment is Auto. However, you may also select 50 or 60 Hz upon the lighting environment of your country. Go to “Setting → Basic → Camera → Advance”, choose the environment setting you wish. Change the Web Interface into your preferred language Use the settings screen to set the language of the Web Interface. Go to “Setting → Basic → System → Language ”. 1. Insert Software CD into your CD-ROM. 2.
PAGE 9
Wireless Setting ( F7115 model ) Power the IP Camera and connect an Ethernet network cable to the IP Camera’s LAN port. Using Intelligent IP Installer and entering the camera’s setting page. Please go to “Setting → Basic → System → Network → Wireless”, set the wireless option to “On” 1. Click Refresh and choose the Access Point you wish to connect. 2. Enter the password within the Active transmit key field if required. 3.
PAGE 10
9. The IP Camera will send you a message with its Public IP and Private IP if the IP Notification Option is enabled. 10. Click on the small camera icon. Then, choose “View a new contact's webcam”. Camera at home says: 12. Click Action button and choose Start control panel to use control panel 11. The IP Camera automatically accepts your invitation and its live video is displayed. 13. You can use Snapshot, Image Setup and PT Control function via MSN add-in control panel.
PAGE 11
Access to the Internet a. Internet connectivity of the IP camera can be established by inputting the cameras IP information within the Information section. (Please go to Setting → Basic → Network→ Information) b. Internet Connectivity of the IP Camera can be established through PPPoE (Point-to-Point Protocol over the Ethernet) by inputting the username and password from your Internet Service Provider (ISP) within the PPPoE section.
PAGE 12
c. Internet Connectivity of the IP Camera can be established if your router is UPnP (Universal Plug and Play) enabled. The IP camera is automatically detected and added to “My Network Places” on your computer. Please note that only Home Routers manufactured after 2006 support the UPnP function. c1. If your router is a UPnP Internet Gateway Device (IGD), turn on the UPnP function within the UPnP section.
PAGE 13
Application of IP Camera 13
PAGE 14
Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. …………………………………………………………………………………..