User's Manual

Product
Overview
Hardware
Installation
Easy Access
EZvuu
Setting
Live View
Appendix
Table of
Contents
Safety Instruction
11
Before you use this product
This product has been designed with safety in mind. However,
the electrical products can cause fires which may lead to
serious body injury if not used properly. To avoid such
accidents, be sure to heed the following.
Legal Caution
Video and audio surveillance can be forbidden by laws that
vary from country to country. Check the laws in your local
region before using this product for surveillance purposes.
Don't open the housing of the product
Don't try to open the housing or remove the covers which may
expose yourself to dangerous voltage or other hazards.
Don't use the accessories not recommend by
the manufacturer
Heed the safety precautions
Be sure to follow the general safety precautions and the
“Operation Notice.”
Operation Notice
- Operating or storage
location
Avoid operating or storing the camera in the following
locations:
Extremely hot or cold places
(Operating temperature: 0 °C to + 50 °C [32 °F to 122°F] )
Exposed to direct sunlight for a long time, or close to heating
equipment (e.g., near heaters)
Close to water (e.g., near a bathtub, kitchen sink, laundry tub)
Close to sources of strong magnetism
Close to sources of powerful electromagnetic radiation, such
as radios or TV transmitters
Locations subject to strong vibration or shock
In case of a breakdown
In case of system breakdown, discontinue use and contact
your authorized dealer.
In case of abnormal operation
If the unit emits smoke or an unusual smell,
If water or other foreign objects enter the cabinet, or
If you drop the unit or damage the cabinet:1 Disconnect the
cable and the connecting cables. 2 Contact your authorized
dealer or the store where you purchased the product.
Transportation
When transporting the camera, repack it as originally packed
at the factory or in materials of equal quality.
Ventilation
To prevent heat buildup, do not block air circulation around
the device.
Cleaning
Use a soft, dry cloth to clean the external surfaces of the
device. Stubborn stains can be removed using a soft cloth
dampened with a small quantity of detergent solution, then
wipe dry.
Do not use volatile solvents such as alcohol, benzene or
thinners as they may damage the surface.