User's Manual

17
 AMR Audio: an audio codec of the third generation communication for mobile.
PHONE. While the option selected, your mobile phone will receive the audio file from
IP Camera. And you can choose the bit rate from 4.75k to 12.2k. However, the usage of
this codec will cause frame-rate decreasing.
 Off: audio file won’t be transmitted by IP CAM.
Audio Output
Select the speaker output gain value you wish in the drop-down menu and save it.
Note: The Camera does not support echo cancelling; using the full duplex mode may cause audio feedback.
Live View
Video
Please refer to p.15~17
Audio
Please refer to p.17~18
Camera Setting
Image Setting
Image Enhancement
 Brightness: The image brightness can be adjusted in the range 0-100, the a higher value produces a
brighter image.
 Saturation: Adjust the saturation in the range 0-100, the higher value gets more colorful image.
 Contrast: Adjust the image's contrast by raising or lowering the value in the range 0-100.
 Sharpness: Controls the sharpness applied to the image in the range 0-100. A sharper image might
increase image noise especially in low light conditions. A lower setting reduces image noise, but the
image would be less sharp.
White Balance
You can choose the white balance to Auto, Fluorescent, Incandescent, Sunny and Cloudy.