User's Manual

14
Image Setting
The image setting can be enhanced by adjusting the setting values as below:
 Brightness: The image brightness can be adjusted in the range 0-100, the a higher value produces a
brighter image.
 Saturation: Adjust the saturation in the range 0-100, the higher value gets more colorful image.
 Contrast: Adjust the image's contrast by raising or lowering the value in the range 0-100.
 Sharpness: Controls the sharpness applied to the image in the range 0-100. A sharper image might
increase image noise especially in low light conditions. A lower setting reduces image noise, but the
image would be less sharp.
 Backlight Compensation: It makes the object clearer display when the image background is too bright
or the object is too dark.
 White Balance: This is used to adjust for the different colors present in different light sources, to make
the colors in the image appear the same. There are 5 modes could be selected from the drop-down menu,
including Auto / Fluorescent / Incandescent / Sunny / Cloudy.
Video
Video performance can be adjusted in this setting page.