User's Manual

18
Note：When you set to On, be sure to select either or both SMTP or / and POP before SMTP.
 POE Sever Name: It is necessary when the POP before SMTP is selected in Authentication. Type the
POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting
is necessary when the SMTP server which sends e-mails performs authentication using the POP user
account.
 User Name, Password: Type the user name and Password of the user who has the mail account. This
setting is necessary when the SMTP server which sends e-mails performs authentication.
 Recipient e-Mail address: Type the recipient e-Mail address up to 64 characters. You can specify up to
three recipient E-mail addresses.
 Administrator e-Mail address: Type the Administrator e-Mail address up to 64 characters. This address is
used for reply mail and sending system messages from the SMTP server.
 Subject: Type the subject/title of the e-Mail up to 64 characters.
 Message: Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2 characters.)
 Effective Period: Set the period when the periodical sending is effective.
 Always: The periodical sending is always effective.
 Schedule: You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can click Schedule to set up schedule setting at schedule screen.