User's Manual

24
 Night Mode: You may set up this action being activated continually while the event triggered or
continually every period(by second) interval.
Note : Only Motion Detection excludes Night Mode
Schedule
You may set up the event schedule as “always” or scheduled by working day, weekend or night mode. You must
configure schedule before using it.
Scheduled Recording
General
Name the recording file and make it on or off.
Action
 File Size: You can manually write in the file size as the suggested range.
 Cyclic Size: You can manually write in the cyclic size as the suggested range.
Schedule
You may set up the event schedule as “always” or scheduled by working day, weekend or night mode. You must
configure schedule before using it.
Motion Detection
Add the motion detection zone and name it, you can adjust the zone of detection with the mouse. There are 10
for detection zone at maximum. The bar on the top of motion detection area is red when the alarm is triggered.
Threshold: Set the threshold of the alarm in the motion detection zone. The higher threshold is, lesser
detections can be triggered.
Sensitivity: Set the sensitivity for motion detection zone. The higher sensitivity is, the more sensitive it gets.
Tampering Detection
Select “on” if you want to activate the tempering detection.
Trigger Duration: This setting is set for the trigger will be started for the duration of tampering lasts you
configure. The duration range is from 5 seconds to 900 seconds.