User's Manual

Use the following DNS server address: Select this when you set the fixed address as the IP address of

DNS server.

 Primary DNS server: Enter the IP address of the primary DNS server.

 Secondary DNS server: Enter the IP address of the secondary DNS server.

Note : 1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating

Point-to-Point Protocol frames insider Ethernet frames. PPPoE connection is used mainly with ADSL

service where individual users connect to the ADSL transceiver (modem) over Ethernet work. It also

widely used in XDSL (digital affiliate line such as ADSL, VDSL or SDSL)

2. Reboot the IP Camera after the network setting has been made.

3. The IP Camera with Intelligent IP Installer can’t be founded after turning on the PPPoE and reboot.

WLAN

( for F3107/F3115 only )

The wireless network has to be set up by using cable network connection. After setting the camera

correctly, the wireless function can work without cable network connection. Please follow the setting

process below step by step:

1. Make sure IP Camera connect with Wi-Fi USB.

2.Go to “Setting → System → Network → WLAN,” select option “Enable”. You will see the wireless

Setting screen.