User's Manual

IP Address Filter

Once enabled it, the listed IP address are allowed or denied access to the product. Add the IP Address that

you’d like to allow or deny and select allow or deny from the list and save it.

HTTPS

HTTPS is a URL scheme used to indicate a secure HTTP connection. It is syntactically identical to the

http:// scheme normally used for accessing resources using HTTP. Using an https: //URL/ with a different

default TCP port (443) and an additional encryption / authentication layer between the HTTP and TCP.

You can use the IP camera through HTTPS easily by using https:// instead of http://.

 Create & Install: Create a self-signed certificate for HTTPS to recognize.

 Installed Certificate: Display or remove the properties of the installed certificate.

 HTTPS Connection Policy: Set HTTPS connection policy for different level of users.

 To use the HTTPS encryption, please set up “Create self-signed certificate” for the first time you

use the HTTPS function, and then set up the connection policy for different users.

Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username

and password and do not protect video and audio. When enable HTTPS with RTSP off mode, the IP Camera

will protect all setting including video and audio.

Network Basic

Please refer to p.10~14

Network Advanced

RTSP

General

RTP Port Range: The default value of port range is 5000 ~ 7999 and can be changed from 1124 to 65534.

RTSP Port: The default value is 554. If the IP Cameras connected with router and installed outside are over

2 sets and all of them need support RTSP, please fill the value in the blank space in the range from 1124 to

65534.