User's Manual

RTSP Configuration

Configure the RTSP by profile, then enable or disable the authentication.

Multicast

Status: This can be enabled or disabled the multicast.

Access Name: This will be shown and changed along with the profile you select.

Multicast Address: Specify the multicast server address.

Video / Audio Port: Specify the transmission port number of the video data, from 1124 to 65534.

Time to Live: Set the maximum TTL that multicast can pass through. The default value is 15.

UPnP

If you have a Router to access to internet and the Router supports UPnP IGD function, you need to turn on

the UPnP Port Forwarding function.

 HTTP port: Enter the HTTP port number and default HTTP port is 80.

 SSL port: Enter the SSL port number and default SSL port is 443.

 RTSP port: Enter the RTSP port, default value is 554 for computer view.

Note : UPnP (Universal Plug and Play): UPnP is a set of computer network protocol. It allows devices to

connect seamlessly and simplify the implementation of networks in the home and corporate environments.

Bonjour

Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices,

and services on IP networks. Bonjour uses industry standard IP protocols to allow devices to automatically

discover each other without the need to enter IP addresses or configure DNS servers.

 Device Name: Enter Device Name you wish.

Note: How to use Bonjour in your Windows Browser UI? Please check the link below:

http://www.apple.com/support/downloads/bonjourforwindows.html