User's Manual

DDNS

DDNS is a system which allows the domain name data held in a name server to be updated in real time. The

most common use for DDNS is allowing an internet domain name to be assigned to a computer with a varying /

dynamic IP Address.

This makes it possible for other sites on the internet to establish connection to the machine without needing to

track the IP Address themselves.

 Server name: Choose the DDNS Server from the list.

 User ID: Enter the user ID for authentication necessary for DDNS connections. Type it up to 64

characters.Password: Enter the password for authentication necessary for DDNS connections. Type

it up to 32 characters.

 Re-type password: Re-type the password to confirm.

 Host name: Enter the host name that is registered to the DDNS server.

 Periodical Update: Update your DDNS information periodically.

Digital I/O

You can set Alarm Input and Output function in this menu to control the I / O port on the rear of the device

linked to the alarm detection and the timer. Select open circuit and grounded circuit as your alarm.

LED

This is optional for user to select to show the LED indicator or not to as the IP Camera is turned on. What

benefit it gets when LED off is it’s not easily to be aware when somebody sneak in the space where the camera

installed, especially at the darkness.

System Log

Enable the remote log to let the log being saved in the remote server in case that the camera being cut down.

Put on the server name and select the sever port and save it.