F312A User Manual 0
F312A User Manual F312A IP Camera Hardware User Manual -Contents- CHAPTER 1. SAFETY INSTRUCTION ........................................................................................2 CHAPTER 2. INTRODUCTION .....................................................................................................5 CHAPTER 3. PACKAGE CONTENTS ..........................................................................................6 CHAPTER 4. PHYSICAL DESCRIPTION..............................................
F312A User Manual Hardware User Manual Chapter 1. Safety Instruction Before you use this product This product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to heed the following. Legal Caution Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.
F312A User Manual IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
F312A User Manual In case of a breakdown In case of system breakdown, discontinue use and contact your authorized dealer. In case of abnormal operation If the unit emits smoke or an unusual smell, If water or other foreign objects enter the cabinet, or If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2 Contact your authorized dealer or the store where you purchased the product.
F312A User Manual Chapter 2. Introduction The ZAVIO F312A is an ultra-compact IP Camera equipped with a high sensitivity progressive scan CMOS sensor, achieving high image quality and superior low-light performance. F312A also supports 802.11b/g wireless connection and night-vision capability even in complete darkness through 6 high power LEDs.
F312A User Manual Chapter 3.
F312A User Manual Chapter 4. Physical Description 4.1 Front View Focus Adjustment Ring - Adjust focus manually to achieve the best image quality Night-Vision White LEDs - LEDs will light up when the environment is too dark. Power LED indicator - Power LED will light up after the IP Camera completed the boot process Network LED indicator - Network LED will light up after the IP Camera connected with network.
F312A User Manual 4.2 Bottom View Power Connector - For connection of 5V DC input.
F312A User Manual Chapter 5. Basic Connection F312A is for both wire and wireless connection. You can follow the procedure below to connect the IP Camera with power and Ethernet for both wire and wireless connection. 5.1 Wire Connection 1. Connect the power adaptor to IP Camera. 2. Connect IP Camera’ Ethernet port to your Hub/ Switch / Router Wire Connection Wireless Connection 5.2 Wireless connection 1. Connect the power adaptor to IP Camera. 3.
F312A User Manual Chapter 6.
