User's Manual

Chapter 3. Setting up Wireless Configuration

The wireless network has to be set up by using cable network connection. After setting the

camera correctly, the wireless function can work without cable network connection. Please follow

the setting process below step by step:

1. Connect IP Camera with Ethernet connection. (Check chapter 7.3.6 for more details)

2.Go to Setting → Basic → Network → Wireless choose option “On”. You will see the

wireless setting page.

2. Go to “Setting→Basic→Network→Wireless＂, set the Wireless option to “ON” .

3. Then click “Refresh”. All access points (AP) around you will show up.