Zaxcom DEVA 4 8 Track High Resolution Digital Audio Recorder DEVA 5 10 Track High Resolution Digital Audio Recorder Owner’s Manual Rev 1 June 2004
Table of Contents Table of Contents.............................................................................................................. 2 Note Regarding DEVA 4 ……………………………………………………………………… 3 ADDENDUM 1 June 23 2004 …………………………………………….……………………4 Software Upgrade Procedure ………………………………………………………………….5 ADDENDUM 2 June 23 2004 …………………………………………………………………6 Introduction ………………………………………………………………………………………8 Features List: ........................................................................................
26.Pros and Cons of DVD-R, DVD-RW, and DVD/RAM................................................. 60 27.Specifications ............................................................................................................. 60 28.Connectors................................................................................................................. 61 NOTE REGARDING DEVA 4 Note: This manual is written for the DEVA 5, but except when it refers to 10 tracks it also applies to DEVA 4.
ADDENDUM 1: 6/23/04 INITIAL PRODUCT RELEASE: As you know by now, the initial release of the DEVA 4 and 5 does NOT include all the features mentioned in pre-release publicity and in this manual. This Addendum provides a description of the items not included in the initial software. ALL the features mentioned will be released via a downloadable software package as they become available in the very near future.
SOFTWARE UPGRADE PROCEDURE They will also be sent as email attachments to all registered DEVA owners. Once you download the file you must write it to a UDF formatted DVD/RAM. Insert the DVD/RAM into the DVD/RAM burner attached to the DEVA Fire Wire port. Update instructions will be included with the update files.
ADDENDUM 2: June 23 2004 Some software features have changed, or are in the process of changing, since this manual was written. This Addendum discusses those changes. They are in no particular order. REFERENCE TONE (12.7) The Reference Tone is 1kHz at 48k Sampling Rate. The tone frequency is purposely tied to the Sampling Rate to provide a quick reference to confirm the rate. At 44.1K the tone is 918 Hz, at 96K it’s 2 kHz, and at 192K it’s 4 kHz. EXTERNAL AES (12.2.
This new option allows you to enter the time of day and then jam the time code clock with the Time of Day (TOD) data. DUAL RATE TIME CODE A new feature allows the Deva to sync to one Time code frame rate and record another. For instance, you can input 23.98 time code from an HD camera and record 29.97 time code derived from it. The 2 frame rates will be in perfect sync matching up at frame one of each second. DEVA will hold perfect time code sync even when cycling power.
Introduction Welcome to DEVA 5! This manual describes the operation and capabilities of the most advanced, yet intuitive, field audio recorder available. Continuing in the tradition of the Deva 2 recorder and the Cameo mixer, DEVA 5 combines incredible capabilities with ease of use and a short learning curve. As you will see in the following pages, DEVA 5 is easy to set up and easy to adapt.
•Mic Power +48v Phantom •External disk interface IEEE 1394 FireWire •Head room: -12 to - 20dB selectable •Direct to hard disk recording with backup to DVD is the most reliable way to record location audio. The Deva recording system gives you peace of mind knowing that temperature, humidity, motion and environmental contamination have no effect on the recordings you will make to a sealed hard disk recorder.
•Sample rate conversion is a necessary tool for post. Only the Deva incorporates internal sample rate conversion allowing for simultaneous copies of production audio to be recorded at multiple sample rates. The Deva is also the only recorder that can record and playback at non-standard sample rates for any audio application. •The Deva has the ability as a location recorder to playback and record at the same time. This opens up many possibilities as a production tool.
Front Panel Descriptions 1: Faders 1 through 4 3: Slate Mic 2: Touch Screen Display 4: Function Buttons, F1 – F6, Menu and Enter 5: Transport Control Buttons 6: Numeric Keypad and Backspace Button 7: Headphone Volume Control 8: Slate Mic Activation Button 1. Faders 1 through 4 – These are the 4 main input faders. They are assignable to any analog or digital input via the FADER ASSIGN menu. They can also be set to act as Pan Pots. 2. Touch Screen Display – Meter and Status Display.
• • 5. 6. 7. 8. HEADPHONE (F6) brings up the selected HEADPHONE matrix menu. MENU advances the screen to the next menu. This is the same as touching the STATUS button in any menu. • ENTER confirms data entry. Transport Control Buttons provide Record, Play and Stop functions when Deva is in NORMAL OPERATING mode. Numeric Keypad and Backspace Buttons provide an alternative means of entering numeric data such as Time Code and Meta-Data.
16. Serial / RS422 Port – 9 Pin connector for external control of the Deva and for mating with a Cameo mixer 17. Time Code Connector – Standard 5 pin Lemo for Time Code I/O 18. USB Port – for connecting approved peripherals such as a keyboard or printer. Right Side Panel Description 19: Camera Connector 21: Analog Outputs 1-6 20: Mic / Line Inputs 1, 3, 5 and 7 23: Mic / Line Inputs 2, 4, 6, and 8 22: Headphone Output 19.
1. Powering the Deva 1.1. Insert a fully charged NP-1 type battery and/or plug in an external 12v DC source to the 4 pin XLR power connector. The external source should be between 10 and 16v DC, 1 amp. Pin 4 is +, Pin 1 is -. 1.2. NOTE – DEVA 5 is internally fused. The fuses are self resetting. If the fuse trips wait approximately 60 seconds then re-power the unit (assuming of course that you first correct the fault that caused the failure). 1.3. Turn the Power Switch on.
2.3. Headphone Output 2.3.1. The Headphone output feeds low impedance (100 ohm) headphones. Headphone routing is done via the HEADPHONE menu on the MAIN MENU screen. You can also SOLO any channel into the headphones by TOUCHING (for about 1 second) that individual meter displayed on the HOME SCREEN. Touching the headphone section or changing to another menu will revert to the current headphone selection. 2.4. Digital Inputs: 2.4.1. DEVA 5 has 8 AES Digital Inputs available on a DB15 mini Connector.
3. Upgrading Deva’s Software: 3.1. Upgrade software will be Emiled to you when a new version is ready. Make sure that your dealer has given your Email address to Zaxcom for this service. You must copy the software to a DVD-RAM and insert that disk in external Fire wire drive. You will be prompted on the Deva screen to ‘UPDATE SOFTWARE?’ Follow the prompts on Deva’s display. Updates will be supported through the internal DVD disk at a later date 4. Security: 4.1.
5.3. Initial Setup 5.3.1. Deva takes 3 seconds to boot up. The first screen you will see is the ‘Home’ Screen. This screen displays the STATUS (currently STOP is displayed);, Time Code (displaying 00:03:47:14); The number of tracks being recorded (10); The battery voltage (14v, either internal or external depending on the source used),; The amount of ‘pre-roll’ in seconds (6); The sampling rate (48000 Hz); The Time Code Frame Rate (23.
bring you to the Main Menu. 5.3.5. This Menu controls all the soft functions of the Deva. The Deva software follows many of the conventions used in MS Windows tm. Lets start by selecting ‘My Deva’. This button displays all the drives connected to the Deva. Use it to set up the hard drive and the internal DVD-R. 5.3.6.
5.3.7. If this is an unused drive we will format it. THIS WILL ERASE ANY DATA ON THE DRIVE (though if accidentally erased, folders are recoverable if you click REBUILD DIRECTORY before you record to the erased folder) 5.3.8. Select ERASE CURRENT FOLDER’. You will be asked for confirmation. If you are sure, Select OK. 5.3.9. Select CURRENT FOLDER so we can name it. This name is alpha/numeric and will usually be the equivalent of the sound roll number. . 5.3.10.
5.3.11. Using the Touchscreen keypad enter the desired roll number or name. Touch the ENT button to enter the name. 5.3.12. Touch the STATUS (STOP) button at the upper right to go back to the previous menu. (Or push the MENU button on the Front Panel). You will not change the status by touching this button. It is safe to select it at any time, even when recording. Touch it 2 more times to get back to the MY DEVA menu.
has finished. You may start a new take at any time. The mirroring process will automatically catch up if needed. 5.3.15. Go back to the MY DEVA menu (you should know how to do this by now…. Ok, select the STATUS button or push the MENU button on the Front Panel.) 5.3.16. Repeat the above process for any additional drives 5.3.17. Go back to the MAIN MENU and select DEVA SETUP 5.3.18. Select INTERNAL SAMPLE RATE to select 48000. 5.3.19.
documentary, select 15 seconds. That way, when your subject says something great, you can push record and have already been recording for 15 seconds BEFORE the subject uttered the gem. 5.3.22. Select HEADPHONE OPTIONS. 5.3.23. Select NORMAL HEADPHONE MENU. 5.3.24. Since we are doing our mono mix to track 5, select track 5 only for the LEFT and RIGHT HEADPHONE MIX. YOU CAN QUICKLY MONITOR INDIVIDUAL MICS BY TOUCHING THE METER DISPLAY ON THE HOME SCREEN FOR THE DESIRED TRACK.
This example shows the HOME SCREEN in SOLO mode for track 4. 5.3.25. Go back to the MAIN MENU. And select FADER ASSIGN 5.3.26. Select Input 1 for Pot 1, Input 2 for Pot 2, Input 3 for Pot 3, and Input 4 for Pot 4. Since DEVA only has 4 input level control pots this menu allows you to select which inputs will be assigned to which pots. 5.3.27. 5.3.28. Next Select the DISK MIX button.
5.3.29. Next select TIME CODE from the MAIN MENU. 5.3.30. For TIMECODE OUT toggle GENERATOR, for TIMECODE RUN MODE toggle TIME OF DAY. Select 30NDF for FRAME RATE. Set TIMECODE REFERENCE to XTAL (more about this later). 5.3.31. You can set the date as user bits by selecting TOGGLE USER BITS. Select ENTER USER BITS and enter the date using the numeric keypad. 5.3.32. Go back to the MAIN MENU.
to set up the microphone inputs. Select the settings for the 4 microphones plugged into inputs 1 through 4. To set microphone powering, touch the 48 VOLTS button. Then select the desired input CHANNEL buttons. The display will show 48V ON highlighted in red. 5.3.33. Repeat the same procedure setting the MIC / LINE LEVEL and the HIGH PASS FILTER for each of the inputs. 5.3.34.
6. Software Guide and Menu Descriptions 6.1. Home Screen 6.1.1. The STATUS bar on the top of the screen displays Run, Stop and Play. Pushing this button takes you to the next menu. THIS CONVENTION APPLIES TO ALL THE SCREENS. PUSHING THE STATUS BUTTON ON ANY SCREEN TAKES YOU TO THE NEXT MENU. IT DOES NOT CHANGE THE STATUS. You can also push the MENU button on the front panel to advance menus. 6.1.2. The HOME SCREEN is an active screen.
6.1.3. The ‘V’ button cycles between 5 different HOME SCREEN layouts.
6.1.4. Not shown is the 5th screen which includes simultaneous Playback controls. This screen is not yet implemented 6.2. METERS. The number of actual tracks will be displayed, between 1 and 10. Ballistics are Peak / Hold. The Peak Hold Bar remains for 3 seconds. The meter is calibrated in decibels. Digital 0 (the maximum recordable level is +24dB in the line input level position. These meters are also active. You can SOLO any input channel by touching the meter display for the desired track.
6.10. CUR shows the INDEX NUMBER of the current take (either the take being recorded or played back). This is also an active display button which takes you to the Internal Disk Folder. 6.11. TOTAL shows the total number of takes in the current FOLDER. 6.12. FOLDER is the number given to the current folder. The Folder is the hard drive partition currently being recorded to. Normally, a new partition would be set up for each Sound Roll, or each day’s work.
7.4. TIME CODE selects the Time Code feature window. This sets all time code and user bit settings. 7.5. DEVA SETUP sets the main operating parameters such as Sample Rate, number of channels, sync reference, etc. 7.6. INPUT CONTROL sets the parameters of the Analog inputs. This includes Mic/Line level, High Pass Filtering, Mic Powering, Gain Trim and Digital Delay. 7.7. MY DEVA is similar to the Windows tm convention, ‘My Computer’.
8.2. The top line shows all your Input Channels plus the slate mic and the reference tone generator. The vertical line on the right shows your 10 available recording tracks. The bottom row of buttons control the parameters of the matrix selections. 8.3. The above example shows DEVA set up to record 8 Digital inputs (for example, from a Cameo or other Digital Board) to tracks 1 through 8 on the Deva and an Analog mix from the mixer, routed through analog inputs 1 and 2 to tracks 9 and 10 on the Deva.
transmitters, Ear Wig feeds, additional recorders, etc. THESE SETTINGS APPLY ONLY WHEN DEVA IS IN THE RECORD OR STOP MODE. In PLAYBACK mode the tracks being played back are routed to their corresponding outputs. When doing simultaneous RECORD and PLAYBACK, the tracks being played back will be output directly while the record tracks will be subject to the OUTPUT CHANNEL MIX menu. (Please note, Simultaneous Record and Playback is not implemented in the initial software release).
10.4. DISPLAY ANALOG INPUTS / DISPLAY DIGITAL INPUTS toggles between analog and digital inputs. 10.5. ENABLE LR OPTION This selection turns the Gain-Pot into a Pan-Pot. For example, in the following screen, Fader One is the Pan Pot between Inputs 1 and 2. Fader Two is the linked level control for Inputs One and Two. Fader 3 is the level control for Input 3 and Fader 4 is the level control for input 4. To turn a pot into a pan-pot, select ENABLE LR OPTION and then select the desired input.
11.1. This group of Menus allows you to set all the Time Code functions. The READER T.C. displays Time code from any External source coming into the DEVA. READER U.B. displays external User Bits. GENERATOR T.C. and GENERATOR U.B. displays Time Code and User Bits being generated by DEVA. 11.2. TIMECODE OUT toggles between Generator and Disk. Generator outputs TC from the internal generator. Disk outputs TC from the hard drive (or whatever disk is selected for playback). 11.3.
11.6.1. This selection toggles the settings for entering and jamming data between Time code, User bits and the time of day clock. This selection changes the display on the 2 buttons to its right. 11.6.2. 11.7. JAM TIMECODE (USER BITS or Time of Day). This button manually jams an external Time code or User bits into the internal generator. 11.8. ENTER TIMECODE (or USER BITS). This button opens a window that allows you to input Time Code or User bit data. 11.9. INC USER BITS ON/OFF.
12.2. REFERENCE SELECT Toggles the reference source for the Internal Sampling Rate. The options are: 12.2.1. EXT. AES. This locks the DEVA to an external digital AES input 1-2 (from, for example, a Cameo or other digital mixer). 12.2.2. INTERNAL REFERENCE. This locks the Deva to its own internal reference. Select this mode when recording via the analog inputs. 12.2.3. AUTO In this mode DEVA chooses whether it is getting an external reference or not. 12.3.
12.5.1. HEADPHONE HOME SCREEN LOCK BUTTON Toggles OFF / ON. This locks your headphone setting on the Home Screen 12.5.2. NORMAL / ADVANCED HEADPHONE MENU. In NORMAL mode the Headphone Matrix is set to monitor what is being recorded (similar to confidence or ‘off tape’ monitoring). In ADVANCED mode you can select to monitor Inputs or Outputs and/or the Camera return feed as well as the track feeds. . 12.5.3. HEADPHONE ALARM TONE. This toggles On / Off any audible alarms DEVA 12.5.4.
M/S Stereo consists of a co-incident microphone pair combining a forward facing microphone on one channel and a bidirectional on another. To monitor them in stereo, you combine the 2 microphones on the left side and ‘subtract’ the 2 microphones on the right. A simple M/S matrix to monitor M/S stereo off the record channels would look like this (where Ch 1 is the mid ‘M’ mic and Ch 2 is the ‘S’ side / bi-directional mic): (The indication for PHASE INVERT is a bar over the inverted selection.
12.6.2. The PRE-SET and PHASE REVERSE buttons are identical to the Advanced Headphone Menu. The above example illustrates a typical M/S monitoring application where track one is your ‘Mid’ microphone and track 2 is your ‘Side (or bi-directional) microphone. 12.6.3. CAMERA INPUT button lets you monitor the return feed via the 10 pin CAMERA connector. There are 2 camera return feeds, but they are internally summed to mono. 12.7.
12.8.1. DISPLAY # OF HOMESCREEN METERS. This button toggles from 4 through 10 and allows you to select the number of meters to be displayed on any of the home screens 12.8.2. METER VERTICAL / HORIZONTAL toggles between the following meter display formats: VERTICAL, HORIZONTAL, BIG HORIZONTAL, BIG VERTICAL. 12.8.3. METER MODE (Not implemented). 12.8.4. METER LABLES opens a window that allows you to enter text on any of the selected meters. 12.8.4.1.
12.8.4.2. Enter the text using your finger or a stylus. Touching SHIFT capitalizes the first letter than reverts to lower case. Selecting ENT Enters the text on the selected meter. 12.8.5. DISPLAY INPUTS shows all the Deva’s inputs, including 8 Analog ins, 8 Digital ins, 1 Camera return input and the internal Slate Mic. 12.8.5.1. Any of these inputs can be SOLO’d in the headphones by selecting its meter display. Selecting it again turns off the SOLO feature. 12.8.6.
12.9. Back to DEVA SETUP; OPERATING MODE 12.9.1. The OPERATING MODE menu toggles between: 12.9.1.1. NORMAL OPERATION where the front panel buttons RECORD, PLAY and STOP control Deva operations. 12.9.1.2. TIME CODE CHASE mode forces Deva to chase incoming Time Code in playback. 12.9.1.3. AUTOLOAD where the DEVA is put into record when it sees external running time code. This mode can be used to slave the Deva control to an HD camera 13.
13.1. This menu sets the parameters for the 8 analog inputs. 13.1.1. To Set 48v Phantom Power, select the 48 VOLTS button and then select the buttons for the desired channels. The 48 VOLTS button will flash RED when it is activated. When phantom power is turned ON that channels’ 48v indicator will also appear in RED. 13.1.2. To set the HIGH PASS FILTER select the HIGH PASS FREQUENCY button and set the desired frequency. You must set the frequency before turning the HPF On or Off for each input.
13.1.3. To turn on the HIGH PASS FILTER select the HIGH PASS FILTER button and select the desired input channels. The HIGH PASS FILTER button will flash GREEN. The HPF indicator on the individual Channel buttons will display HPF XXX, with ‘XXX’ being the chosen frequency. 13.1.4. To set the MIC/LINE input gain, select the MIC/LINE Button and select the individual Input Channels. ‘MIC’ appears in DARK BLUE. ‘LINE’ appears in BLACK.
13.1.5. CLEAR ALL is a convenience button that clears all the settings. 13.1.6. ADJUST DELAY opens a window that allows you to set digital delay to any of the analog or digital inputs. 13.1.6.1. Select the desired channel. Select either MORE DELAY, LESS DELAY or ENTER DELAY. For example, when using, Digital Radio Microphones which have an inherent 3ms delay, you can minimize phasing anomalies between digital and analog radio mics by adding 3 ms of delay to the analog radio mic inputs. 13.1.6.2.
14. My Deva Menu 14.1. The MY DEVA menu gives you access to all the internal and external recording drives. The features and settings for the INTERNAL HD and the other drives are different, so take note of the details below. The display box shows the total size of the drives in gigabytes, and the capacity remaining (also in gigabytes). It also shows the file format for each drive. 2 Firewire optional drives are displayed. As of this software release only 1 Firewire device is enabled. 14.2.
14.2.1. ERASE CURRENT FOLDER both erases and formats the current (selected) folder. When you select this button you will be asked for confirmation. IF YOU ERASE A FOLDER BY MISTAKE YOU CAN SELECT ‘UNDO FOLDER ERASE’. Or, if you have already started recording to that folder you can select REBUILD DIRECTORY’ to recover as much of the erased folder that still remains. 14.2.2. CURRENT FOLDER opens a directory of all the Folders on the internal disk drive called INTERNAL DISK FOLDERS.
14.2.4. ERASE CURRENT FOLDER is a destructive command that deletes the contents of the folder. You will be asked for confirmation. IF YOU INADVERTANTLY ERASE A FOLDER, You may ‘UNERASE IT’ by going back to the INTERNAL DISK UTILITIES menu and selecting the UNDO FOLDER ERASE button. 14.2.5.
14.2.6.1. To go directly to a Segment you can either scroll through the directory with the UP and DOWN Arrows. The PAGE UP and PAGE DOWN buttons, or you enter a Segment # directly through the Enter Seg # button. 14.2.7. The EDIT STN (Scene, Take, Note) button opens the data entry window. 14.2.7.1. Selecting any of the SCENE, TAKE or NOTE buttons opens a data entry window. You may enter up to 6 alpha-numeric characters in the Scene and Take boxes, and up to 16 alphanumeric characters in the Note box.
14.2.8. PLAY ALL (back one level in the INTERNAL DISK UTILITIES menu, will play the contents of the disk if the directory has been damaged or erased. The disk will play like a CD from beginning to end of the disk regardless of directory data (or lack of directory data). 14.2.9. DELETE LAST SEGMENT erases the previous segment. You will be asked for confirmation before it erases anything. 14.2.10. REBUILD DIRECTORY will recreate a directory from the audio contents on the disk.
external drives, they may or may not record in real time. The Internal Hard drive always records in real time. The attached DVD’s may or may not. If not, they will continue mirroring after the take has ended. If they fall behind the actual recording they will continue to mirror from the hard drive whenever DEVA is not in RECORD mode. 14.4. INTERNAL DVD DRIVE. This button gives access to the features of the internal (optional) DVD drive. The first choice is not on the menu. That is the choice of media.
14.4.3. SAMPLE RATE. This button opens a window that allows you to select any sampling rate. Options are 44.1, 47.952, 48, 48.048, 96, 96.096 and 192K. There is also a CUSTOM button so you can select any other sampling rate up to 192K. PLEASE NOTE THAT YOU SHOULD SET YOUR INTERNAL HARDDRIVE (In the Deva Setup Menu) FOR THE HIGHEST SAMPLING RATE YOU INTEND TO WRITE TO ANY OF THE EXTERNAL, OR DVD, DRIVES. (Does this also apply to 48/48.048?) 14.4.4. ERASE DISK erases (and formats) the disk.
This is the main playback menu. It is used to select Cues for playback. Simultaneous playback while recording is not yet implemented. When implemented, this screen will allow you to select tracks for playback, view the waveform, and set beginning and end cue points. You will be able to select tracks for any of the folders on the hard drive. You will be able to trigger playback during record from both this screen and the home screen. 18.1. PREV SEG button selects the next previous segment for playback.
17. Headphone This button selects the basic headphone matrix. The advanced headphone matrix can be selected in DEVA SETUP through the HEADPHONE OPTIONS button. 17.1. LEFT HEADPHONE MIX. These buttons select the tracks desired for the left side of the headphones. In this menu you are monitoring the audio being recorded. 17.2. CAMERA INPUT. This sends the audio from the camera return (via the 10 pin Camera connector) to the headphones. NOTE: THIS IS A MONO RETURN.
17.5.1. Selecting a PRESET button brings up the following menu. 17.6. GET USER PRESETS allows you to select any of the 12 custom presets. 17.7. GET FACTORY PRESETS. 20 Presets are pre-programmed into DEVA.
17.8. PHASE INVERT. To reverse phase on any monitored track, select this button and then select the desired track. THE PHASE INVERT FOLLOWS ANY PREVIOUS PHASE ADJUSTMENT DONE IN THE RECORDING MATRICES. If you have phase reversed a channel you do not have to phase reverse the headphone monitor. It is already reversed. 18. Scene Take Note 18.1. This menu opens up the Meta-Data entry windows. It can also be accessed via the STN button on the Front Panel. 18.2.
RECORD button. If there is a false start you can hit the FALSE START button on the front panel. This will delete the previous take # (BUT IT WILL NOT DELETE THE ACTUAL TAKE). 18.3. TAKE inputs the take number. It will open up an ENTER TAKE window. Use the Deva number pad or this pop-up alpha-numeric display to enter your take #. 18.4. NOTE. This button will open the alpha/numeric data entry screen. You can enter any note up to 16 characters in length. 18.5. CUR SEG ‘X’ of ‘X’.
20. Operation ‘Hints and Tricks’ 1. After recording a take, Hit PLAY. Then touch each active meter display. This will SOLO each channel. This is a fast easy way to check a take. When it’s time to begin recording again, just push RECORD. There is no re-cueing necessary. Deva will start recording at the next blank spot on the hard drive. To turn off the SOLO monitoring, just hit the meter that says SOLO to revert back to normal monitoring. 2.
21. Formatting Hard Drives DEVA will recognize virgin drives when they are installed and will prompt you to format them. At any ‘destructive’ stage you will be asked for confirmation 22. Formatting DVD or CD Media DEVA will recognize new (‘virgin’) media and will prompt for formatting. 23. Simultaneous Playback and Record Not yet implemented. 24. ZAX files Not yet implemented. 25. DEVA 5 in the Transfer Suite Not yet implemented DEVA’s RS422 port emulates a Sony BWV-60 tape deck.
26. Pros and Cons of DVD-R, DVD-RW, and DVD/RAM 26.1. DVD-R disks are the fastest to write and are the most universal but can only be written to one time. 26.2. DVD-RW disks can be written to many times, so they can easily be modified in the field. They are not as universally readable as DVD-R disks. DVD-RW disks must also be formatted before use. This process can take up to 20 minutes per disk. 26.3. DVD-RAM disks are also re-writable.
28. Connectors 28.1.
28.2. Camera Connector, 10 Pin 28.2.1. Balanced analog outputs channels 5 and 6 on pins 1-4. Camera returns 1 and 2 on pins 5 and 7 (summed to mono in Deva).
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 AES IN 3,4+ 1,2+ NC 7,8+ 5,6+ GND GND NC GND GND 3,41,2NC 7,85,6- AES OUT 3,4+ 1,2+ NC 7,8+ 5,6+ GND GND NC GND GND 3,41,2NC 7,85,6-
MAIN MENU OPERATING MODE SELECTS NORMAL DISPLAY # OF HOMESCREEN METERS METER VERTICAL / HORIZONTAL METER MODE METER LABELS HEADPHONE HOME SCREEN LOCK BUTTON METER LABELS MENU DISK MIX DISK CHANNEL MIX OUTPUT MIX OUTPUT MIX FADER ASSIGN NOTMAL / ADVANCED HEADPHONE HEADPHONE ALARM TONE ADVANCED HEADPHONE MENU NORMAL HEADPHONE MENU LEFT HEADPHONE MIX MENU LEFT HEADPHONE MIX MENU OPTIONS 44.1, 47.