Owner`s manual

Front Panel Descriptions

2: Touch Screen Display

3: Slate Mic

1: Faders 1 through 4

4: Function

Buttons, F1 –

F6, Menu and

Enter

5: Transport Control

Buttons

6: Numeric

Keypad and

Backspace

Button

7: Headphone

Volume Control

8: Slate Mic

Activation

Button

1. Faders 1 through 4 – These are the 4 main input faders. They are assignable

to any analog or digital input via the FADER ASSIGN menu. They can also be

set to act as Pan Pots.

2. Touch Screen Display – Meter and Status Display. This is the principal

software interface. You may use your finger or any PDA type stylus.

3. Slate Mic

4. Function Buttons F1 – F6, plus MENU and ENTER – These are dual use

buttons. When the display shows the HOME screen buttons F1 through F6

perform the function written above them. In other menu modes the Function

keys can be user programmed.

• CUE (F1) Brings up the ‘Cue’ or Playback Menu

• C.TAKE (F2) Marks a take as a ‘Circled Take’ in the Meta Data file. This can

be pushed either during record or after the take has been recorded but before

the next take has started. All Meta-Data can be edited after the fact.

• FALSE START (F3) Marks a take as a ‘False Start’ in the Meta Data file.

The SEGMENT number will not increment upon record. It can be pushed

either during or right after the false start record.

• TIME CODE (F4) brings up the Time Code menu.

• S.T.N. (F5) brings up the SCENE TAKE NOTE Meta-Data file entry menu.