Owner`s manual

5.3.

Initial Setup

5.3.1. Deva takes 3 seconds to boot up. The first screen you will see is

the ‘Home’ Screen.

This screen displays the STATUS (currently STOP is displayed);,

Time Code (displaying 00:03:47:14);

The number of tracks being recorded (10);

The battery voltage (14v, either internal or external depending on the source used),;

The amount of ‘pre-roll’ in seconds (6);

The sampling rate (48000 Hz);

The Time Code Frame Rate (23.98);

The headphone monitor settings (Factory preset, Channels 1 and 2 stereo, Left = Ch 1,

Right = ch2);

The current segment number or ‘index’ number (1);

The total number of recorded takes (6);

The ‘Folder’ name or number (Friday);

The lower box displays the scene (1), take (1) and note data (“Save”).

To the right are the meter displays. There is a peak / hold bar that will stop and hold at

the highest recorded level for 3 seconds. (note – NEED A TIME REMAINING LINE)

5.3.2. Note the ‘V’ to the right of the STATUS display. This button

cycles through the 4 variations of the HOME screen.

5.3.3.

5.3.4. To set up the DEVA touch the STATUS button. In this example, it

says ‘STOP’. Touching this with either your finger or a stylus will

take you to the MAIN MENU

. Pressing the MENU button will also