Owner`s manual

to set up the microphone inputs. Select the settings for the 4

microphones plugged into inputs 1 through 4. To set microphone

powering, touch the 48 VOLTS button. Then select the desired input

CHANNEL buttons. The display will show 48V ON highlighted in red.

5.3.33. Repeat the same procedure setting the MIC / LINE LEVEL and

the HIGH PASS FILTER for each of the inputs.

5.3.34. You can also adjust the input gains using ADJUST TRIM and set

delay (for instance, to match digital radio mics with analog radio

mics, or to match a close up mic with a distant mic) ADJUST

DELAY.

5.3.35. Deva is now ready to record