Owner`s manual

6.1.4. Not shown is the 5

screen which includes simultaneous Playback

controls. This screen is not yet implemented

6.2. METERS. The number of actual tracks will be displayed, between 1 and

10. Ballistics are Peak / Hold. The Peak Hold Bar remains for 3 seconds.

The meter is calibrated in decibels. Digital 0 (the maximum recordable level

is +24dB in the line input level position. These meters are also active. You

can SOLO any input channel by touching the meter display for the desired

track. Touch and hold the desired track for 2 seconds. The display will enter

‘solo’ mode. Then, touching any other track instantly solos that track. To

exit ‘solo’ mode touch and hold any track for 2 seconds or touch the

Headphone ICON.

6.3.

TKS. – Displays the number of tracks selected for recording (between 1 and

10).

6.4.

INT or EXT displays the selected power source.

6.5. The BATTERY ICON shows the current voltage of the power source that is

powering Deva at that moment. DEVA will auto switch. If external power is

applied AND a battery is inserted, DEVA will run on the external power until

it drops below 9.5v. It will then seamlessly auto switch to the internal

battery.

6.6. PRE shows the selected amount of Pre-Record. In this case it is 15

seconds. DEVA has a memory buffer. If the unit is on and audio is coming

in, DEVA will record up to 15 seconds of audio PRIOR to the record button

being pushed.

6.7. Adjacent to PRE is the SAMPLING RATE selected for recording to the

internal hard drive.

6.8. Next is the TIME CODE FRAME RATE

6.9. The button with the headphone icon is an active button. Selecting it takes

you to the Normal Headphone menu. This display button shows what track

or tracks are being monitored in the headphones.