Owner`s manual

33
10.4. DISPLAY ANALOG INPUTS / DISPLAY DIGITAL INPUTS toggles
between analog and digital inputs.
10.5. ENABLE LR OPTION This selection turns the Gain-Pot into a Pan-Pot.
For example, in the following
screen, Fader One is the Pan Pot between
Inputs 1 and 2. Fader Two is the linked level control for Inputs One and
Two. Fader 3 is the level control for Input 3 and Fader 4 is the level control
for input 4. To turn a pot into a pan-pot, select ENABLE LR OPTION and
then select the desired input. Each touch on the input will toggle between X,
L and R. X = level, L=Pan Left, R= Pan Right.
10.6. The default for the matrix is Mic 1 to Fader 1, Mic 2 to Fader 2, Mic 3 to
Fader 3 and Mic 4 to Fader 4. In the following example screen, Inputs 1 and
2 are using Pot # 1 as a Pan Pot and Pot # 2 as a joint fader. Input 3 is
controlled by Pot 3 and Input 4 is controlled by Pot 4.
11. Time Code