Owner`s manual

43
13.1.
This menu sets the parameters for the 8 analog inputs.
13.1.1. To Set 48v Phantom Power, select the 48 VOLTS button and then
select the buttons for the desired channels. The 48 VOLTS button will
flash RED when it is activated. When phantom power is turned ON that
channels’ 48v indicator will also appear in RED.
13.1.2. To set the HIGH PASS FILTER select the HIGH PASS FREQUENCY
button and set the desired frequency. You must set the frequency
before turning the HPF On or Off for each input. You can set different
frequencies for each input
.