Owner`s manual

53
This is the main playback menu. It is used to select Cues for playback.
Simultaneous playback while recording is not yet implemented. When implemented,
this screen will allow you to select tracks for playback, view the waveform, and set
beginning and end cue points. You will be able to select tracks for any of the folders
on the hard drive. You will be able to trigger playback during record from both this
screen and the home screen.
18.1. PREV SEG button selects the next previous segment for playback.
18.2. NEXT SEG advances the next segment for playback.
18.3. ENTER SEG opens a window to enter in any segment number for
playback.
18.4. <<REW:1 is similar to the rewind function on a tape deck. Touch it once
and it rewinds at 3x speed. Touch it again and it fast rewinds at 10x. To
stop rewind push the STOP button (the real button on the face of the Deva…
remember them?).
18.5. >>FFWD:1 Operates the same as the REW button, but in the other
direction.
18.6. ENTER TCODE opens a window that allows direct entry of a time code
starting point.
18.7.
Touch the Folder Button to select the Folder and Segment for playback.
16. Enable Tone
This button on the MAIN MENU turns the reference tone generator ON and OFF. The
settings for the Tone level are found on the DEVA SETUP menu. The routing for the
Reference Tone can be set on the DISK MIX and OUTPUT MIX menus
.