Owner`s manual

57
RECORD button. If there is a false start you can hit the FALSE START
button on the front panel. This will delete the previous take # (BUT IT
WILL NOT DELETE THE ACTUAL TAKE).
18.3. TAKE inputs the take number. It will open up an ENTER TAKE window.
Use the Deva number pad or this pop-up alpha-numeric display to enter your
take #.
18.4. NOTE. This button will open the alpha/numeric data entry screen. You
can enter any note up to 16 characters in length.
18.5. CUR SEG ‘X’ of ‘X’.
This button allows you to select any previous
segment to enter data. Data can be edited at any time, BUT NOTE THAT IF
YOU ARE MIRRORING TO A DVD R YOU CAN NOT CHANGE THE DATA
ONCE IT HAS BEEN WRITTEN. You have 2 options if you wish to edit
Meta-Data after the fact. You can use a re-writable media such as DVDRW
or DVD/RAM, or you can write to the DVD/R after you have finished editing
your Metadata.
18.6. RESET TAKE
18.7. STORE NOTE stores the custom note you created in in one of 20
PRESET NOTE boxes.
18.8. CLEAR NOTE erases the selected pre-set note.
18.9. RIGHT ARROW advances the data display to the next available segment
18.10. LEFT ARROW advances the display to the next previous segment.
19. Manual
Currently not implemented