Owner`s manual

Deva IV and Deva V Owner’s Manual
Chapter 5
25
Solo Mode
You can Solo any input channel by touching the meter displa
y for the desired track. Touch and hold the
desired track for 2 seconds. The display will enter ‘solo’ mode. Then, touching any other track instantly
solos that track. To exit ‘solo’ mode touch and hold any track for 2 seconds.
Battery Display
The battery Icon shows the current voltage of the power source (Int or Ext) that is powering DEVA at that
moment. DEVA will auto switch. If external power is applied and a battery is inserted, The DEVA operates
on the external power until it drops below 9.5v. It then automatically switches to the internal battery.
Important: The DEVA does not charge the internal battery.
PRE
PRE shows the selected amount of Pre-Record. In this case it is Off. DEVA has a memory buffer. If the unit
is on and audio is coming in, DEVA will record up to 10 seconds of audio PRIOR to the record button
being pushed.
Note: The Pr
e-Record buffer works only with a sampling rate of 48 kHz or less
Sampling Rate
Adjacent to PRE is the SAMPLING RATE selected for recording to the internal hard drive.
Time Code Frame Rate
Next is the TIME CODE FRAME RATE
Mirroring button
The Mirroring button displays the status or the internal and external mirror drives. Touching this button
brings you to the My DEVA menu.
CUR
CUR shows the INDEX NUMBER of the current take (either the take being recorded or played back). This
is also an active display button which takes you to the Internal Disk Folder.
Total
Total shows the total number of takes in the current FOLDER.
Folder
Folder is the name of the current folder. The Folder is the hard drive partition currently being recorded
onto. Normally, a new partition would be set up for each Sound Roll, or each day’s work. The Folder Num-
ber would then be the equivalent of the Sound Roll N
umber. You can also rename the folder without num-
bers, and that name appears on the home screen and the folder when mirrored to a DVD-RAM disc or