Owner`s manual

28
Deva IV and Deva V Owner’s Manual
Chapter 5
This matrix provides a great amount of flexibility for recording.
Figure 5-4 Disk Channel Mix Screen
In the disk channel mix screen, the top line shows all your Input Channels plus the slate mic and the refer-
ence tone generator. The vertical line on th
e right shows your 10 available recording tracks. The bottom
row of buttons control the parameters of the matrix selections.
Figure 5-4 shows DEVA set up to record 8 Digital inputs (for example
, from a Cameo or other Digital
Board) to tracks 1 through 8 on the DEVA and an Analog mix f
rom the mixer, routed through analog inputs
1 and 2 to tracks 9 and 10 on the DEVA. The SLATE MIC and the TONE generator are enabled for all 10
tracks.
Analog/Digital Toggle
To select either Analog or Digital inputs use the TOGGLE button. Selecting a box once enables it, selecting
it again disables it.
Pre-Fader / Post-Fader
The PRE-FADER button allows you to choose whether each selection is Pre or Post fader. For example,
you can record the microphone on one channel of the DEVA post fader and on another pre-fader, so it is
unaffected by the mix.
o Pre-Fader: A or D appear in white on the matrix screen.
o Post-Fader: A or D appear in black on the matrix screen.
Preset
The PRESET button allows you to save and recall up to five saved settings. Saving is performed automati-
cally by simply pressing the preset button. This moves
to the next preset. Any changes performed with the
matrix are “saved” to that preset.
Phase Invert
PHASE INVERT reverses phase of the selected input. A reversed phase input appears with a bar over the
letter A or D.