Owner`s manual

Deva IV and Deva V Owner’s Manual
Chapter 5
35
Transport Operation
This button toggles through three transport options; normal, T.C. Chase, and Auto-load.
Normal
All functions are controlled by the main transport buttons.
T.C. Chase
In playback mode, DEVA chases external time code.
Auto-Load
DEVA transport controls are locked to an external r
ecorder such as an HD camera. When the camera
goes into record, The DEVA also goes into the Record mode
GPI Remote Roll
Enables external transport control using a contact closure switch. This button toggles through the three
options; off, Rising Edge, and Falling Edge.
OFF
Normal DEVA Operating mode.
Rising Edge
Places the DEVA into record when the contact is open.
Falling Edge
Places the DEVA into record when the contact is closed.
Serial Remote Roll
Enables the control of the DEVA using the Serial port.
Serial Port Mode
Used in conjunction with the Serial Remote Roll, it determines the serial port protocol. The serial port can
either be configured as a standard RS-232 or Standard RS-422 port.
Command Monitor
Similar to Microsoft Windows DOS Prompt, or the UNIX terminal, it provides a command line to the
DEVA. At this time, the Command Monitor has not been implemented and should not be used.
Master Output Mode
When the Deva MIX-12 is used, the Master Output Mode selects if the playback switch of the output bus-
ses is enabled or disabled.