Owner`s manual

Deva IV and Deva V Owner’s Manual
Chapter 5
37
the hard drive. Check-Sum Error Correction insures that what is being sent to the internal hard drive is
being recorded there.
CAMERA INPUT
When a 10-pin camera connector is attached to the cam
e
ra port, this button allows you to monitor
the return feed.
Note: The camera
feed is a mono return, while there are two camera return feeds, they are internally summed to mono.
Get Factory Presets
brings up 20 factory monitoring presets:
Store User Presets
Allows you to create and store your own monitor presets.
Get User Presets
allows you to recall these presets.
Phase Invert
Reverses the phase of the monitored channel for use in M/S
m
onitoring. This does not change the
phase of the recorded channel, it only reverses phase in the monitor.
METERS
The Meters screen provides the options for metering. This includes how many meters are shown on the
home screen, the orientation of the meters, and their size.
Figure 5-15 Meters Screen
Display # of Home screen Meters.
Toggles from 4 through 10, allowing you to select the number of meters to be displayed on any of the home
screens
Meter Vertical / Horizontal
Toggles between the following meter display formats: Vertical, Horizontal, Big Horizontal, Big Vertical.