Owner`s manual

44
Deva IV and Deva V Owner’s Manual
Chapter 5
Mic/Line Level
To set the Mic/Line input gain, press the Mic/Line button, then select the individual Input Channels. 'MIC'
appears in DARK BLUE. 'LINE' appears in BLACK.
Clear All
This button provides a convenient way to clear all the settings, and put the Analog Input Control screen
back to the factory default settings.
Adjust Delay
Opens a window allowing you to set digital delay to any of the analog or digital inputs.
Figure 5-1 Adjust Delay Screen
Adjusting the Delay
1. Press the channel you want adjust the delay in.
The button changes to white indicating it is the selected channel.
2. Select either More Delay, Less Delay or Enter Delay.
Note: When using Digita
l
Radio Microphones which have an inherent 3 ms delay, you can minimize phasing anomalies
between digital and analog radio mics by adding 3 ms of delay to the analog radio mic inputs.
3. Repeat steps 1 & 2 until all channels have been adjusted.
Clear Delay
Clears all the entered delays.