Owner`s manual

Chapter 2 Deva MIX-12 Owner’s Manual
6
Faders
The channels the faders are assigned to are permanently assigned and cannot be changed. They are
assigned as follows:
You can assign digital inputs 5 through 8 to the 4 rotary faders on the Deva.
Important: You must ensure all channels controlled by the Mix-12 are not assigned to the rotary faders on the
Deva.
Faders are assigned in Faders menu.
To use the faders on the Mix-12, you must setup the audio to be routed to the output busses post
fader. The Mix-12 faders cannot be used when the Deva audio is routed using the pre-fader option.
Each fader has an input meter. The meter is a pre fader indication of the input level feeding that
channel. Adjustments to the input level are performed using the channel trims located along the top
of the Mix-12.
Faders 9 through 12
The Deva IV and V have only eight microphone inputs. However faders 9 through 12 allow you to
use the four AES digital inputs on the Deva for additional inputs. On the Deva, you can assign these
digital inputs to any track or place them on any output pre- or post-fader.
If you would like to use these for additional microphone inputs, you need to use an external A/D
converter. When using an external A/D, the word clock on the Deva feeds the external A/D, so it is
in sync with the Deva clock. You always want the Deva clock to be the master when using external
A/D devices.
A
nalog Input
8
A
na
l
og Input
7
A
nalo
g
Input 6
A
na
l
og Input 5
A
nalo
g
Input
4
A
na
l
og Input 3
A
nalo
g
Input
2
A
na
l
og Input 1
Channel
8
7
6
5
4
3
2
1
Fader
Di
g
ital Input 4
Digita
l
Input 3
Di
g
ital Input 2
Digita
l
Input
1
Channel
12
11
10
9
Fader