Owner`s manual

Chapter 2 Deva MIX-12 Owner’s Manual
8
Channel Button Shortcuts
❏ EQ menu - When in the EQ menu, pressing CH changes the which of the five filters is being
controlled by the jog wheel. Pressing CH moves the control knob to the next filter.
❏ Bus menu - When in the Bus menu, pressing CH toggles the cross point.
Bus Button
An individual bus routing menu allows the routing for a single channel on the internal Deva mix
busses and to the external output busses. The number keypad on the mix-12 can be used to make
channel assignments on the DEVA and assign the outputs.
The Bus LED indicates channel, output, or disk that is in the mix when in the Stop mode. When in
Record, the Bus LED indicates the channels in the disk mix.
When bus is pressed once, the input bus routing menu appears on the Deva. Pressing the a keypad
number toggles between analog post-fader, analog post-fader inverted, analog pre-fader, and analog
pre-fader inverted.
NOTE: If using fader strips 9 through 12, you control the digital signal, not the analog.
If bus is pressed a second time, the output routing for that channels appears on the Deva. The talk
and slate keys are selected in the output bus menu. When bus is pressed a third time, it exits.
The list below contains the keys that perform special functions.
Bus Screen
❏ CH button - Toggles the cross point.
Input Screen
❏ Left Arrow and Right Arrow - Switches between Disk Channel and Output Channel.
Output Screen
❏ Up Arrow and Down Arrow - Switches between Disk Channel and Output Channel.
❏ Slate, Talk 1, Talk 2 - Toggles cross points in the output mix.
PFL Button
The PFL keys select an input channel directly to the headphone bus in a pre fader mode. When the
PFL is active the current headphone selection will be suspended while the PFL is active. Pressing
the PFL keys activate and de-activate the PFL function. Only the headphone us is effected by the
PFL function. Multiple inputs can be selected when using the PFL function.
When the metering is changed the LED lighting is inverted.