Owner`s manual

Deva MIX-12 Owner’s Manual Chapter 2
9
TALK1, TALK2 and SLATE
To route the Talk keys press BUS on the fader associated with the output bus number to route.
For example, press BUS twice on fader 3 to route the Talk keys to MIX bus or output bus 3. The
menu displays a Xpoint selection for the Slate and Talk keys.
Hint: The Slate and Talk keys can be pressed at the same time to talk to each destination at the same time.
The Slate key on the Mix 12 is a duplication of the Slate key on the Deva itself.
TONE KEY
The Tone key toggles tone on and off. The button lights when tone is active.
Reassigning the Tone Key
The Tone Key can be reassigned in the Mix 12 screen on the Deva. The Tone key can be reassigned
to perform the following functions:
❏ Tone
❏ Home Screen key
❏ Escape
❏ Play
❏ Unassigned - This essentially disables the Tone key.
Output Level POTS
The analog output levels of busses 1 through 4 are controlled by the output level pots. The output
level is adjustable from 0 dBu to infinity. The AES digital outputs are also affected by the output
level pots. Outputs 1 through 4 should be used to feed returns to Comteks or any device where an
output level adjustment is necessary.
You cannot adjust the output level of outputs 5 and 6 from the MIX12.