User`s manual

Chapter 3_______________________________________________________Zaxcom Deva User’s Manual
140
Deva Service Menu Warning page
Page purpose: This page allows new software to be installed and allows the owner / operator to make changes
to Deva’s functionality.
How to get here:
(MENU key  Type 036  Setup button  Service button)
(Mode Status button  Type 036  Setup button  Service button)
Figure 3-74 Deva Service Menu page
Page Notes
None
Page Level Shortcuts
None
Software Options button
This allows the purchasable options to be enabled in the field, instead of having to send the Unit in to Zaxcom.
Processor Speed button
Normal – Runs the processor at 245.76 MHz.
High – Runs the processor at 294.912 MHz.
This allows the owner / operator to change the operating speed of the processor. (These processor speeds are
based on the software and hardware configuration used to create this User Manual. YMMV!)
NOTE: High – Increases the mirroring process performance by 20%.
Load ProgFile button
Load From CD-R button
Burn Program ROM button
See the section: Upgrading the Firmware in Each Unit {p.178}.