User`s manual

Chapter 8_______________________________________________________Zaxcom Deva User’s Manual
166
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
Freq field Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}
Q field Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}, with the following exception(s):
BACKSPACE key – 1) The first time the backspace is pressed it enters a decimal point.
2) If the cursor is on the last character, it deletes the character at the cursor and moves
the cursor left one character.
3) If the cursor is not on the first or last character, it moves the cursor left one position,
without deleting the character.
4) If the cursor is on the first character, it has no effect.
EQ Memory view Shortcuts
1 – 5 keys – pressing one of them loads / saves (depending on the mode) in the respective memory.
E key – exits the EQ page and returns to the Analog Input (#) page {p.89} for this channel.
BACKSPACE key – returns to the EQ page.
(Analog / Digital) Input (#) – BUS page Shortcuts
LEFT / RIGHT ARROW keys – select which bus (Disk Channel vs. Output Channel)
1 – 9 and 0 keys – cycles cross-points
E key – exits the BUS page and returns to the Analog Input (#) page {p.89} for this
channel
(Analog / Digital) Input Delay page Shortcuts
0 – 9 keys – opens the data entry field for the currently selected (highlighted) button (see Enter Delay button
Shortcuts). Type the remainder of the number.
Enter Delay button Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}
Disk Folders page Shortcuts
None
Name Folder button Shortcuts
See: Common Keyboard page Shortcuts {p.159}.
Folder “???” Contents page Shortcuts
None
Enter Seg # button Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}
Mirror Drive page Shortcuts
Typing a number opens a Segment number data entry field. Once entered, the system enters it as the Start Seg
button’s data.
Typing a second number opens a second Segment number data entry field. Once entered, the system enters it
as the End Seg button’s data.
Start Seg field Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}
End Seg field Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}