User`s manual

Chapter 3_______________________________________________________Zaxcom Deva User’s Manual
42
Disk Mix page
Page purpose: This page routes the 8 analog inputs, 8 digital inputs, slate mic and the reference tone to the 16
(or 10) recording tracks.
How to get here:
(MENU key  Disk Mix button)
Deva-16 Top view Deva-16 Bottom view
Deva-5.8 view
Figure 3-4 Disk Mix page
Page Notes
In this page, the top line shows the 8 available input channels (In1 – In8) plus the slate mic and the tone
generator. The vertical line of numbers on the right shows the 12 available recording tracks. The bottom row
of buttons controls the parameters of the matrix selections.
Figure 3-4 {above} shows a Deva-16 set up to record 8 analog pre-fader inputs to tracks 1 through 8, 2 digital
pre-fader inputs recorded to tracks 9 and 10 and a post-fader mix to tracks 11 and 12. Analog input #1 and
digital input #2 are inverted. The slate-mic and the tone generator are enabled for all tracks except 13 - 16.
Page Level Shortcuts
None
Disk Mix matrix buttons
Connects the Input Channel to the Recording Channel.
Pressing one of them cycles through the available choices, based on the setting of the (Analog / Digital) In Toggle
button, Phase Invert button and (Pre- / Post-) Fader button.
Indicator
Description
Black A
Analog input post-fader
Black A with Line
Analog input post-fader with signal phase inverted
White A
Analog input pre-fader
White A with Line
Analog input pre-fader with signal phase inverted
Black D
Digital input post-fader
Black D with Line
Digital input post-fader with signal phase inverted
White D
Digital input pre-fader
White D with Line
Digital input pre-fader with signal phase inverted
Table 3-3 Indicator Descriptions
Slate buttons
Pressing one of them selects / deselects (indicated by an X) sending the slate source on the associated path.
Tone buttons
Pressing one of them selects / deselects (indicated by an X) sending tone on the associated path.