User`s manual

Chapter 3_______________________________________________________Zaxcom Deva User’s Manual
88
Mic/Line Level button
To set the mic / line input gain, press the Mic/Line Level button, then select the individual Input Channels. MIC
appears in Blue. LINE appears in Black.
Clear All button
This button provides a convenient way to clear all the settings, and resets this page back to the factory default
settings.
NOTE: Pressing this button does NOT do anything to the following settings: limiters, trim, delay.
Adjust Delay button
Pressing it displays the (Analog / Digital) Input Delay page {p.109}.
High Pass (#) Hz button
To set the Highpass Frequency, do the following:
1. Press the High Pass (#) Hz button.
You are prompted to enter the highpass frequency in Hz.
2. Use the numeric keys to enter the frequency.
The valid range is 30 to 240 Hz. Default setting: 70 Hz
Any value outside this range is placed near the closest valid number within this range.
3. Press High Pass (#) Hz button or the ENTER key to finish entering the Cutoff Frequency.
High Pass (#) Hz button Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}
Adjust Trim button
Pressing it displays the (Analog / Digital) Input Trim page {p.111}.