User`s manual

Zaxcom Deva User’s Manual_______________________________________________________ Chapter 3
89
Analog Input (#) page
Page purpose: This page maintains several parameters for each analog input channel.
How to get here:
(MENU key  Input Configure button  Analog (#) buttons)
Figure 3-42 Analog Input (#) page
Page Notes
You have two methods to change each parameter on this page (does not apply to values that toggle):
o Click on a parameter button and a data entry field appears. Directly enter the value and press the ENTER
key.
o If you enter a value that is out of the valid range, the closest value in range is applied.
Page Level Shortcuts
1 – 8 keys – the same as clicking on analog channel buttons 1 – 8.
D key – goes to the Analog Input (#) – Dynamics page {p.91} for the current channel.
E key – goes to the Analog Input (#) – EQ page {p.94} for the current channel. This functions the same
as the EQ key on the Mix-12.
B key – goes to the Analog Input (#) – BUS page {p.97} for the current channel. This functions the
same as the BUS key on the Mix-12.
(Mic / Line) Level button
Pressing it toggles this channel’s level between LINE LEVEL and MIC LEVEL.
48V (On / Off) button
Phantom power works in cooperation with the mic / line level settings. If you have a channel set to Line-Level,
you can’t turn On that channel’s phantom power.
NOTE: If you change a channel from microphone input (Mic) to line input (Line), the phantom power for that
channel is turned ‘OFF’ and the 48V On button is changed to 48V Off.
Setting Phantom Power
To turn ‘ON’ 48V phantom power, select the 48V (On / Off) button. When phantom power is enabled, 48V Off
changes to 48V On.
Delay button
Press it to enter a value for the duration of this input’s delay.
Unit = msec – (Valid range: 0 – 40, Value step: 1)
Unit = samples – (Valid range: 0 – 1920, Value step: 1)
Delay button Shortcuts
See: Common Data Entry Field Shortcuts List {p.159}