User`s manual

Chapter 3_______________________________________________________Zaxcom Deva User’s Manual

HPF button

Press it to enter a value for the cutoff frequency for this input’s high-pass filter.

Off

(Valid range: 30 – 240 Hz, Value step: 1)

HPF button Shortcuts

See: Common Data Entry Field Shortcuts List {p.159}

Limiter (On / Off) button

Pressing it toggles the limiter for this channel On or Off. This limiter’s settings cannot be adjusted.

Trimmer graphic fader

Adjusting it sets the pre-amp level for this channel to optimize this channel’s performance. If you look at the

bottom of the fader background, you’ll see the numeric representation of the slider’s position, within 0.25 dB.

This makes it easy to repeat a setting, if necessary. (Valid range: -20 – 0 – +30 dB, Value step: 0.25)

NOTE: The scale is NOT dBFS and it is NOT dBu. It is a purely relative comparison to the input value arriving

at the fader.

Level meter

It displays the current audio level for this channel. The view point for this meter is post trimmer and pre-fader.

The scale is dBFS.

Digital Output button

Pressing it enables (On) / disables (Off) the digital output for this channel.

Dynamics button

Pressing it displays the Analog Input (#) – Dynamics page {p.91}.

EQ button

Pressing it displays the Analog Input (#) – EQ page {p.94}.

NOTE: Unlike the Fusion-10, the Effects Package is included in both the Deva-5.8 and Deva-16.

BUS button

Pressing it displays the Analog Input (#) – BUS page {p.97}.

Mix12 Input Trim Select button

Normal – Indicates any changes made to this channel’s Mix-12 Input Trim knob will adjust the Deva’s

preamp for this channel.

Tx ZaxNet – Indicates any changes made to this channel’s Mix-12 Input Trim knob will send a ZaxNet

command to adjust this channel’s transmitter preamp.