User's Manual
Table Of Contents
- TRXLA3 Transmitter
- Home Screen
- Main Menu
- Sub Menus
- TIME CODE MENU
- TRANSMIT MENU
- RECORD MENU
- ZAXNET MENU
- AUDIO MENU
- SETUP MENU
- Firmware
- Inputting Audio
- Recommended Microphones
- Wiring Diagrams
- Operating Frequencies
- Product Support
- Specifications
- Zaxcom Warranty Policy and Limitations
Zaxcom TRXLA3
Time Code Menu
10
Mute Time Code Transmission Until Jammed
If the mute time code menu is set to ON the ZaxNet transmitter will not broadcast time code over ZaxNet
until the transmitter receives time code and jams its own internal time code generator. This prevents the
ZaxNet from sending incorrect time code to another device.
Auto Frame Rate Enable
When turned ON the TRXLA3 will automatically set its frame rate to the frame rate that is being transmitted
from the ZaxNet transmitter that is feeding the TRXLA3. If auto frame rate is set to OFF the frame rate will
need to be adjusted manually. Please note that auto frame rate will only work when the time code is being
received over ZaxNet and will not work when time code is being received via the audio input.
MUTE TC SEND
UNTIL JAMED: OFF
AUTO FRAME RATE
ON (23.98)