Specifications

MAIN MENU Recording Setup
19
My Nomad Menu
This menu controls the primary recording and mirroring functions.
Mirror Mode
• OFF: Nomad will not mirror any files.
• ON: Nomad will only start to mirror once the unit has gone into Stop mode.
• CONTINUOUS: When Nomad is recording, the audio is copied to the mirror card immediately after it is written
to the primary card. Depending on the track count, the mirror card may lag behind a bit. Not to worry, after
you go into Stop mode, the mirror card will catch up.
Write Sound Report
When you select this, Nomad will create a Sound Report and write it on the Mirror CF card. The sound report
contains the Meta Data information for what was recorded.
NOTE: Mirror mode must be turned off to write a sound report.
NOTE: If you are finding that mirroring is lagging you may be using too much of Nomad’s processing power
elsewhere. Many times there are items that are on that are on are not needed. These items can often be shut
off to conserve processing power and speed up the mirroring process. You can check to see that some of these
items are not unnecessarily on:
Bus Assignments Cross Points, Compressor Enables (input, output and card), High Pass Filters and Notch Filters.