Specifications

MAIN MENU Recording Setup / Primary Card
21
Erase Current Primary Folder
This menu allows you to delete an entire folder on the recording media
WARNING: If you have mirrored a folder and need to erase it to make room for more recording files on the primary
card, REMOVE the MIRROR card before doing the erase. If you don’t, the folder will be ERASED FROM BOTH CARDS!
Format Primary Card
This menu is where the primary CF card is formatted. This process will take about 4 minutes to complete.
ISO Attenuation
The NeverClip™ inputs allow large signals to travel through the digital mixing engine using 32 bit floating point
numbers. Once these large signals are recorded into a 24-bit WAV (or MARF) file, the advantage of floating point math
is lost and these signals can clip if you don’t use a card limiter.
ISO Attenuation allows ISO record tracks to be attenuated by a user selectable fixed amount of 6, 12, 18 or 24 dB. This
allows audio to be recorded, even if its dynamic range would normally be too large. This gain reduction is stored in the
metadata of the WAV file so Post can restore the amplitude of the ISO tracks, when needed.