Specifications

MAIN MENU Fader Assign

Fader Assign Matrix

This matrix controls which inputs are assigned to the six hardware faders.

Because Nomad is a digital mixer, no actual audio is going through the Nomad Fader controls allowing for complete

flexibility for the mixing hardware faders. Any one of the analog inputs 1-8, digital inputs 1-8, analog trim controls or

ZaxNet trim can be routed to any hardware fader.

Setting a Cross point

Rotate the MENU knob to scroll through the matrix. Stop in the matrix, at the intersection of the input channel and

output channel, where you want to send that specific input. Press the MENU knob to cycle through the available cross

points, which are:

• Blank – no connection

• A – Assign an analog input to a fader

• D – Assign a digital input to a fader

• T – Trim where the fader knob will work as a hardware trim knob

• Z – Assigns the fader to control the trim of a Zaxcom wireless transmitter

NOTE: Assigning a “Z” can only be done when ZaxNet is in transmit mode

NOTE: To have access to the “T” Trim or “Z” ZaxNet, press the Star key on the front panel when in this matrix.

That will add the “T” and “Z” to the cycle.

NOTE: If you are using a multiple-element mic (i.e., stereo, surround, etc.) and you assign all of the channels to

one master fader you need to disable the AutoTrim

function.

Hardware Fader

Number

Input