Specifications

MAIN MENU Mode Settings

Mode Menu

Scroll for additional menu items

Sample Rate

Available sample-rates: 44100, 47952, 48000, 48048, 88200, 96000

TC Transport

This adjusts the way Nomad will go into record mode

• Normal – Nomad will go into record when the record button is pushed.

• Auto Load – Nomad will go into to record with it senses record run TC coming from an external source.

Slate Source

Selects if internal the slate mic or an external slate mic will be used when the SLT key is pressed. The external

microphone will be connected to the External Slate Microphone input jack on the side of Nomad.

Prerecord

This allows Nomad buffer the audio in a prerecord buffer. You can choose to buffer up to 10 seconds of audio. From the

point the Nomad is powered up, it is always processing data, any sound coming in from any input is always being

processed. When pre-record time is enabled, the signal is held in a buffer until you press the REC key. At that time, all

stored audio in the buffer is included the current Take.

The pre-record buffer is dumped after any of the following settings are changed:

• Sample-rate, Timecode, User-bits, Frame- Rate, Track count

NOTE: Prerecord is only available when the sample rate is 48048 or lower.

NOTE: Running prerecord doesn’t use any additional battery power.

Selected Sample Rate

Enable a Sample Rate over 48048

and you will have to run less than 8

tracks. This matrix allows you to

deselect tracks.